Whirlpool SERIES 940 Setting the Controls, Selecting a wash cycle, Cycle RINSE/WASH Later, Normal

Setting the Controls

Operating your dishwasher’s controls properly helps you obtain the best possible washing results. This section tells you how to select wash cycles and options.

Selecting a wash cycle

Press a Cycle pad. The dishwasher starts filling once you press a Cycle pad unless you select the delay wash cycle. You may press Option pads as the machine is filling.

CYCLE

RINSE/WASH LATER

For rinsing a few items to be washed one or more days later.

lDo not use detergent.

lWater is not heated

during Rinse/Wash Later.

lAir Dry is automatically selected.

LOW ENERGY/CHINA

Single wash for prerinsed or lightly soiled loads.

lSelect High Temp Wash to heat water in the main wash (markedt).

lThe water heats to 140°F (60°C) in the final rinse (marked f+).

NORMAL

Double wash for normal, everyday soiled loads.

.- (The Energy Guide label is based on this cycle.)

BiiiiI l Select High Temp Wash to heat water in the main wash (markedr).

lThe water heats to 140°F (60%) in the final rinse (marked n).

A “0”shows what each cycle includes CYCLE

MAIN FINAL TIME WASH RINSE WASH RINSE RINSE DRY (Minutes]

. 412

l t . d-t . 60’

. et . d-f . 66’

‘Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher. The cooler the water, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown.

contlnued on next page

13