Using the rinse agent dispenser
Keep the rinse agent dispenser filled with a liquid rinse agent. A rlnse agent greatly Improves dish drylng by helplng water flow off them during the last rlnse. A rinse agent also keeps water from forming drop- lets and drying as spots or streaks.
A small amount of rinse agent automati- cally releases into the rinse water during the final rinse of each cycle. For best drylng results, check dispenser perlodlcally to see if It needs filling.
To check dispenser:
_ l
l
Check center of Fill Indicator Cap. Clear means it needs filling.
OR
Remove Fill Indicator Cap. An ‘E” is visible
when dispenser is empty. | Cap center clear | “E”vlslble |
| when empty | when empty |
To fill dispenser:
The rinse agent dispenser holds 6 ounces (175 mL). Under normal conditions, this lasts about 3 months.
1.Open dishwasher door completely.
2.Remove Fill Indicator Cap.
3.Add rinse agent. Fill to smallest opening in lower part of dispenser only. Overfilling may cause rinse agent to leak out. This
will not harm the dishwasher, but could | Do not fill past |
cause oversudsing. | smallest openlng |
4.Clean up any spilled rinse agent with a damp cloth.
5.Replace Fill Indicator Cap. Keep it closed tightly.
NOTE: You do not have to wait until the dispenser is empty before refilling, but do
not overfill it. Your dishwasher is designed to Keep dlspenser fllled for best drylng results use a liquid rinse agent. You do not need to
use a solid or
12
