Whirlpool SES374H warranty Baking/Roasting Cont, Using Your Range, Press, You See

Models: SES374H

1 40
Download 40 pages 9.39 Kb
Page 17
Image 17
BAKING/ROASTING (CONT.)

USING YOUR RANGE

BAKING/ROASTING (CONT.)

5.Press START/ENTER.

A preheat conditioning time counts down the approximate preheat time after the oven tempera- ture has been set and START has been pressed. The heat, bake, and on indicator lights will light up. The oven control automatically sets preheating times based on the oven temperature you select:

For 245°F and less, the preheating time is 3 minutes.

PRESS

START

ENTER

(example for set temperature of 325°F)5 SEC

YOU SEE

ON

(example for set temperature of 325°F)

For 250°F-445°F, the preheating time is

YOU SEE

6 minutes.

 

For above 450°F, the preheating time is 10 minutes.

The oven is preheated and ready to use when you hear a 1-second tone, the on indicator light goes off, the countdown is finished, and the set temperature is displayed.

The preheat and set temperatures may be different at the end of the countdown. This is normal.

NOTES:

When the oven temperature is greater than 170°F, no preheat conditioning time will be shown in the display.

You can change the temperature setting any time after pressing START/ENTER. You do not have to press START/ENTER again.

The preheat conditioning time will not change if you reset the temperature before the countdown time ends.

If you are baking/roasting while the minute timer is counting down, you can see the set baking/roasting temperature for 5 seconds by pressing BAKE.

ON

17

Page 17
Image 17
Whirlpool SES374H warranty Baking/Roasting Cont, Using Your Range, Press, You See, example for set temperature of 325F