CARING FOR YOUR RANGE
LIFT-UP COOKTOP AND SURFACE BURNERS
1.Remove the surface burner grates.
2.Lift the front of cooktop at both front corners until the support rods lock into place.
NOTE: Do not drop the
cooktop. Damage could result to the porcelain and the cooktop frame.
3.Wipe the surface under the cooktop with warm, soapy water and a sponge. Use a soap- filled plastic scrubbing pad on heavily soiled areas.
4.Wipe off the surface burners with warm, soapy water and a sponge after each use. To remove
solution for
5.Check the burner flames once in a while for proper size and shape as shown.
Ports |
|
|
|
| A good flame is blue in | ||||||
|
|
|
| color. If flames lift away | |||||||
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| 1 " |
|
|
|
| from ports, are yellow, |
|
| ||||||||||
|
|
|
|
|
| 2 |
|
|
|
| or are noisy, turn off the |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| burner. Allow the burner |
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
| to cool and follow Step 6. |
|
|
|
|
|
|
|
|
|
|
| If you still have a problem, |
|
|
|
|
|
|
|
|
|
|
| contact an authorized |
|
|
|
|
|
|
|
|
|
|
| service technician to |
|
|
|
|
|
|
|
|
|
|
| check the air/gas mixture |
|
|
|
|
|
|
|
|
|
|
| |
or see the Installation Instructions. | |||||||||||
6.If the ports are clogged, clean with a straight pin. DO NOT enlarge or distort the ports.
DO NOT use a tooth-
pick to clean the ports. Toothpick pieces may clog the ports.
7.To lower the cooktop, lift the cooktop from both sides while pressing the support rods back to unlock them. Lower the
cooktop into place.
8.Replace the surface burner grates.
18
