USING YOUR RANGE
LIGHTING STANDING PILOTS
Your range comes with standing pilots. When you first use your range, you have to light the standing pilot. The pilot light will stay lit when you turn off the burners.
To light surface burner pilots:
1.Make sure all controls are turned off.
4.The pilot flame should be 1⁄4 to 3⁄8 inch high. If the pilot flame needs
adjustment, turn the pilot adjustment screw located near the manifold pipe, behind the control panel.
2.Remove the surface burner grates from the cooktop. Lift up the cooktop. (See
cooktop and surface burners” section.)
5.Lower the cooktop and replace the grates before using the surface burners.
3.To light, hold a lit match over the pilot light located between the front and back burners.
6
