UsingYourRange
Usingthe surface burners
Surface burner
marker
Your range is equipped with either standing pilots or electronic ignitors. Standing pilots must be lit initially with a match following the directions on page 7. The pilot light will remain lit when the burners are turned off. To turn a burner on again, just push in and turn the control knob to LITE and the burner will light. Electronic ignitors automati- cally light the burners each time the control knob is turned to LITE.
Control knobs must be pushed in,
then turned to the LITE position. On electronic ignitor models, the clicking sound is the ignition sparking.
To stop the clicking sound after the burner lights, turn the control knob back to a desired setting. The control knob can be set anywhere between HI and OFF.
Surface burner markers
The solid dot in the surface burner marker shows which surface burner is turned on by that knob.
Usa a medium setting to continue cooking or to fry chicken or pancakes; for gravy, puddings and icing; to cook large amounts of vegetables.
Use a low setting to keep food warm until ready to serve.
NOTE: Do not cook with the control in the LITE position.
In case of a prolonged power failure
Surface burners with electronic ignitors can be manually lighted. Hold a lighted match near a burner and slowly turn the control knob on until the burner lights.
