Whirlpool SF304BSW Usingthe ovencontrol, Using Your Range, To light oven burner pilot, Baking

Using Your Range

Continued

To light, hold a lit match over the pilot light located between the front and back burners. The pilot flame should be l/4 to 3/8 in. (.6 - 1 cm) high.

If the pilot flame needs adjustment, turn the pilot adjustment screw midway down the length of the manifold pipe, under the control panel.

Replace the cooktop and the grates before using the surface burners.

To light oven burner pilot:

1. Make sure the Oven Temperature Control is OFF.

2. Remove the broiler drawer. Slide drawer out to stops, lift both sides, then slide the rest of the way out.

3. Hold a lit match over the oven burner pilot located at the rear of the burner.

4. After the oven burner pilot is burning

steadily, check burner lighting by turning the Oven Temperature Control to a temperature above 140°F (60°C). The burner will take 50-60 seconds to light.

5. Replace the broiler drawer.

Usingthe ovencontrol

Baking

1. Position the rack(s) properly before turning on the oven. To change rack position, pull rack out to stop, raise front edge and lift out.

The rack(s) should be placed so the top of the food will be centered in the oven. Always leave at least 1 l/2 to 2 inches (4-5 cm) between the sides of the pan and the oven walls and other pans. For more informa- tion, see the Cooking Guide.