Whirlpool SF362BEG warranty Setting the Controls, Locked/Cleaning

USING THE SELF-CLEANING CYCLE

SETTING THE CONTROLS

1. Set the oven control knob to CLEAN.	PUSH AND TURN		YOU SEE
The door will lock itself within 6 seconds. If the		WARM	OVEN ON light goes
door has a problem locking, it will try to lock itself	BROIL		on. DOOR LOCKED/
		200
for 1 minute. If the door fails to lock, the Self-			CLEANING light
	CLEAN	250
Cleaning cycle will cancel. An error code will be			flashes until you
		300
displayed.			close door, then is
		350
NOTE: Do not attempt to open the door while in	500	400	solid. HEATING light
	450
			goes on when oven
the locking mode.
			starts heating.
2. Set the cleaning time (optional).	PRESS
Press the “up” (s) or “down” (t) pad(s) to
select a clean time between 2 hours, 30 minutes
and 4 hours, 30 minutes.
NOTE: The Self-Cleaning cycle will
automatically set a 31⁄2 hour cycle unless a
different time is selected.
3. During the last 30 minutes of the Self-Cleaning cycle			YOU SEE
the oven will start to cool down.			OVEN ON and DOOR
			LOCKED/CLEANING
			lights are on. HEATING
			light goes off and COOL
			appears in display.
Once the oven goes below the locked			YOU SEE
temperature:

OVEN ON light flashes.

DOOR LOCKED/ CLEANING light goes out when door unlocks.

4. Turn the oven control knob to OFF.	TURN
	BROIL	WARM
		200
	CLEAN	250
		300
		350

YOU SEE

OVEN ON light goes out and time of day appears in display.

500400

450

5.After the oven is cool, wipe off any residue or ash with a damp cloth or sponge.

If needed, touch up spots with a mild abrasive cleanser or cleaning sponge.

20