Command pads
Touch Command Pads to tell the microwave oven what to do and in what order to do it. Examples:
- CLOCK SET tells the oven you are going to set the clock.
- START tells the oven to start.
Each Command Pad (except CLOCK SET,STARTand CANCEL] lights an Indicator Light on the digital display. The Indicator Light comes on when you touch the Command Pad.
Number pads
Once you’ve touched a Command pad to tell the oven what to do, you’ll touch Number Pads to tell it...
- a time,
- a Cook Power,
Programming tone
Each time you touch a pad you will hear a tone. If you do not hear a tone,
it is because the instruction is not correct, or it is because the tones have been removed,
EXAMPLE: | If you touch | a Number Pad | before | you | touch | a Command | Pad, you | |||||
will not hear a tone. The instruction is not correct. |
|
|
|
|
| |||||||
If you want | to remove | the tone: | If you want | to | replace | the | tone: | |||||
l | Open | the | door. |
|
| l | Open | the | door. |
|
| |
l | Touch | CANCEL | twice, | then START. | l | Touch | CANCEL twice, | then | START. | |||
l | The tone | will not | sound for any | l | The tone | will | sound for any | correct | ||||
| touch. |
|
|
|
|
| touch. |
|
|
|
|
|
Setting the clock
When the oven is first plugged in, the Clock,Display shows 88:88. If the electric
power ever goes off, the ClockDisplay will again show all 8’s when the power comes back on.
You can cook or use the Minute Timer without setting the clock, but the display will be blank after cooking
DO THIS...
1. Touch CLOCK SET.
THIS HAPPENS...
The Display will show a “0”and
the colon will start to flash. [The first Number Pad must be touched within 5 seconds or the display will go blank. Touch CLOCK SETagain and continue.)
8
