Whirlpool SM988PEP Changing the cooking time, Lower cook powers, Do THIS... .-,I&-lI~Yj -w.z-a~1

IIIi

dOWll

The Display counts down the time to show how much time is left in the first cycle.

When the cooking time ends, “End” will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CANCEL.) “End” will remain on the Dis- play until door is opened or CANCEL is touched. The Display will then show the time of day.

Changing the cooking time.

Cooking time can be changed any time before touching STARTor during the cycle:

I, Touch COOK CYCLE 1

2.Touch numbers for new time.

3.Touch START.

Cook Cycle 1will continue cooking for the new time.

lower cook powers

For best results, some recipes call for lower Cook Powers. The lower the Cook Power, the slower the cooking. Each Number Pad also stands for a different percentage of Cook Power. Many recipes in your MICRO MENUS* Cookbook tell you, by number, which Cook Power to use. Recipes in other books and,maga- zines may tell you by name (HI, MED, LO, etc.] or percentage (lo%, 50%, 80%, etc.).

The following chart gives the percentage	of Cook Power each Number	Pad
stands for, and Cook Power name usually	used.	‘lmk.

automatic 100% of full power HIGH

9 = 90% of full power

8 = 80% of full power

7 = 70% of full power MED-HIGH

6 = 60% of full power

5 = 50% of full power MED

4 = 40% of full power

3 = 30% of full power MED-LOW

2 = 20% of full power

1 = 10% of full power LOW

0 = no power (fan and light will be off)

DO THIS... .-,I&-lI~Yj _-w.z-a~1

1. Put food in the oven and close

the door.

--c__o~s~.l,~-~““s~~ ,m,l.p.,.“:l _--._ 2. Touch COOK CYCLE 4.

THIS HAPPENS...

./“-?I .Y.rf I.

The COOK CYCLE 1 Indicator Light will come on and the Display will show four O’s