What happens in each cycle
When the Cycle Control Knob is set to a
number and pulled out, the washer fills (with
the selected water temperature) before agita-
tion and timing start. The washer will begin
agitating immediately after filling; agitation can
occur with the washer lid up or down. After
agitation starts, the knob turns clockwise until it
points to OFF and the cycle ends.
The washer pauses briefly throughout
each cycle.
These pauses are normal for
washer operation.
NOTE: If your washer drains into a laundry tub,
remove lint collected in tub or strainer.
F-l 4 Fill
Wash selected time
Drain-No agitation
Spin
Fill
Rinse
Drain-No agitation
Spin