Whirlpool TAWMZOOA warranty Selecting a cycle, Time, Water temperature tips, Heavy cycle

Water temperature tips

l

l

Use warm or hot wash water with permanent press fabrics.

For heavily soiled permanent press or knit clothes, pre-wash or pre-soak in warm water before washing.

See the “Waler usage guide’ on page 15 for more information.

Selecting a cycle and

You will find information you need to help you make correct cycle selections in this section.

lPages 7-8: Use the information on these pages to guide you when selecting a wash cycle and time.

. Page 9: Use this page to help you under- stand what happens during a wash cycle

NOTE: Your washer selects a wash water temperature and time when you select a wash cycle. You may select different wash times by first selecting the water temperature and then turning to the new wash time. For example, if you desire 14 minutes wash time with cold water:

1.Push in the Cycle Control Knob and turn it clockwise to NormalB (cold wash water).

2.Pull out the Cycle Control Knob and allow your washer to fill.

3.When your washer has filled, push in and turn the Cycle Control Knob clockwise to Heavy-14. (Your washer may add a small amount of additional warmer water, but this should not affect the overall desired wash water temperature.)

4.Pull out the Cycle Control Knob..

time

Wash water tempe:ahrre

I NORMAL#I

Heavy cycle

The Heavy cycle features hot water for heavy soils and longer spins to shorten drying time.

l Use 14 minutes of wash time to clean sturdily constructed fabrics and heavily soiled loads.

I

I

Heavy cycle

6