Whirlpool TES325G warranty Removing The Oven Door Cont, The Oven Light, To replace the oven light

CARING FOR YOUR RANGE

REMOVING THE OVEN DOOR (CONT.)

2.Hold oven door so that the top edge of each hinge hanger is horizontal. Insert hinge hangers into the front frame hinge slots.

3.Rotate top of door toward range. Slide hinge hangers down onto front frame support pins.

NOTE: Make sure the hinge hangers are fully seated and engaged on the support pins.

4.Insert the door stop clip with the angular surface at the top of the frame hinge slot, then push in the bottom of the clip until flanges are flush with the front frame.

5.Open the door completely and remove the door removal pins. Save door removal pins for future use.

6.Close the door.

Door stop	Range
clip
Door removal	Hinge
	hanger
pin hole
	Support pins

	Front frame
	hinge slot
	Angular
	surface of
Door removal	door stop
	clip
pin hole

THE OVEN LIGHT

The oven light will come on when you open the oven door.

To turn the light on or off when the oven door is closed:

•Push the oven light switch on the backguard.

To replace the oven light:

1.Unplug range or disconnect power.

2.Remove the glass bulb cover in the back of the oven by turning

it counterclockwise.

4.Replace the bulb cover by turning it clockwise.

5.Plug in range or reconnect power.

3.Remove the light bulb from its socket. Replace the bulb with a 40-watt appliance bulb.

NOTE: The oven light will not work during the Self-Cleaning cycle.

31