CARING FOR YOUR RANGE
LIFT-UP COOKTOP AND SURFACE BURNERS
1. Remove the surface burner grates.
wWARNING
Carbon Monoxide Poisoning Hazard
Do not operate with a yellow flame.
Doing so can result in death, heart attack, or convulsions.
5.Check the burner flames once in a while for proper size and shape as shown.
Ports
A good flame is blue in color. If flames lift away
2.Lift the front of cooktop at both front corners until the support rods lock into place.
NOTE: Do not drop the
cooktop. Damage could result to the porcelain and the cooktop frame.
3.Wipe the surface under the cooktop with warm, soapy water and a sponge. Use a soap- filled plastic scrubbing pad on heavily soiled
areas.
4.Wipe off the surface burners with warm, soapy water and a sponge after each use. To remove
solution for
1 " from ports, are yellow,
2
or are noisy, turn off the burner. Allow the burner
to cool and follow Step 6.
If you still have a problem, contact an authorized Whirlpool service techni- cian to check the air/gas
mixture or see the Installation Instructions.
6.If the ports are clogged, clean with a straight pin. DO NOT enlarge or distort the ports.
DO NOT use a tooth- pick to clean the ports. Toothpick pieces may clog the ports.
continued on next page
17