Whirlpool TGR51 warranty Cleaning chart

Cleaning chart

Use the following table to help you clean all parts of your range.

PART	WHAT TO USE
Control knobs	Sponge and warm, soapy
	water

Control	panels	Sponge	and warm,	soapy
		water
		OR
		Paper towel and spray glass
		cleaner
Exterior	surfaces	Sponge	and warm,	soapy
(other than control		water
panels)

Surface	burner	Warm, soapy water and a
grates and chrome		nonabrasive,		plastic	scrub-
reflector	pans	bing pad
		OR
		Dishwasher
Surface	burners	Sponge	and	warm,	soapy
		water
		Warm, soapy water and a
		nonabrasive,		plastic	scrub-
		bing pad
		OR
		Vinegar	and	water	solution

HOW TO CLEAN

l Turn knobs to OFF and pull straight away from control panel.

l Wash, rinse and dry thoroughly. Do not soak.

l Replace knobs. Make sure all knobs point to OFF.

DO NOT USE steel wool or abrasive cleaners. They may damage the finish of the knobs.

l Wash, rinse and dry thoroughly.

DO NOT USE steel wool or abrasive cleaners. They may damage the finish. DO NOT SPRAY cleaner directly on panel. Apply cleaner to paper towel.

l Wash, rinse and dry thoroughly.

USE nonabrasive, plastic scrubbing pad on heavily soiled areas.

lDo not use abrasive or harsh cleansers.

They may damage the finish.

NOTE: Do not allow foods containing acids (such as vinegar, tomato or lemon juice) to remain on surface. Acids may remove the glossy finish. Also wipe up milk or egg spills when cook-top is cool.

l In dishwasher, wash with other cooking utensils.

lDry completely.

lDo not use abrasive or harsh cleansers

l Lift up the cooktop. (See page 17.)

l Wipe off spills immediately after burner has cooled.

For cooked-on food:

*Remove burner from manifold with Phillips screwdriver.

l Wash with warm, soapy water and a plastic scrubbing pad or soak in vinegar and water solution.

lRinse and dry well.

lIf ports are clogged, clean with a straight pin. Do not enlarge or distort ports. Do not use a wooden toothpick.

lDo not clean surface burner in dish- washer.

20