Whirlpool TGS325E manual LIFT-UP Cooktop and Surface Burners, Ports

CARING FOR YOUR RANGE

LIFT-UP COOKTOP AND SURFACE BURNERS

1.Remove the surface burner grates.

wWARNING

Carbon Monoxide Poisoning Hazard

Do not operate with a yellow flame.

Doing so can result in death, heart attack, or convulsions.

5.Check the burner flames once in a while for proper size and shape as shown.

2. Lift the front of cooktop at both front corners

Ports

A good flame is blue in color. If flames lift away

until the support rods

lock into place.

NOTE: Do not drop the

cooktop. Damage could result to the porcelain and the cooktop frame.

3.Wipe the surface under the cooktop with warm, soapy water and a sponge. Use a soap- filled plastic scrubbing pad on heavily soiled

areas.

4.Wipe off the surface burners with warm, soapy water and a sponge after each use. To remove cooked-on food, soak the burners in a vinegar

and water solution for 20-30 minutes. Then scrub them with a plastic scrubbing pad. (See “Cleaning chart” earlier in this section for more information.)

1 " from ports, are yellow,

2

or are noisy, turn off the burner. Allow the burner

to cool and follow Step 6. If you still have a problem, contact an authorized service technician to check the air/gas mixture

or see the Installation Instructions.

6.If the ports are clogged, clean with a straight pin. DO NOT enlarge or distort the ports.

DO NOT use a tooth-

pick to clean the ports. Toothpick pieces may clog the ports.

continued on next page

27