CARING FOR YOUR RANGE

REMOVING THE OVEN DOOR (CONT.)

To replace:

NOTE: The door removal pins you inserted must still be in both sides of the door.

1.Grasp the door on the sides with your fingers on the front of the door and your thumbs on the inside surface.

2.Rest the hinge hanger so that it is flat (at the bottom of the hinge hanger on the bottom of the front frame slot).

3.Position the door with the hinge hanger slots almost parallel to the front frame.

4.Push up and in until the hinge hanger slots become fastened to the range. Lower the door and rotate it slightly from the front to the back until the slots are fully fastened. The hinge hanger will be close to the bottom of the front frame slot.

5.Pull door open about halfway and remove the door removal pins. Save door removal pins for future use.

6.Close the door.

Remove door removal pin

Oven door

Range

 

Hinge hanger

Up

Hinge hanger flat

In

Front frame slot bottom

29

Page 29
Image 29
Whirlpool TGS325E manual To replace