6 Remove towel and replace lower dishwasher rack
Remove towel from dishwasher. Reinstall the lower dishrack.
If needed, see website for animated representation
of this step. Visit www.whirlpool.com/anchoring under FAQ tab.
Complete Installation
1 Reinstall access panels
Insulation
(on some models)
Access panel
Insulation
2 Reinstall access panels
Hold the two panels together and place them against dishwasher leg. Using a philips or 1/4” screwdriver, reinstall the screws through the holes in the access panel and the slots in the lower panel.
3 Check lower panel edge
Check that the lower edge of the lower panel contacts the floor. Adjust if necessary.
4 Tighten screws
Lower
panel
Grounding 
clip
Check that grounding clip is attached to the lower panel. Position the lower panel behind the access panel. On some models there is insulation on the access panel which must fall behind the insulation on the lower panel.
Tighten access panel screws.
TEFLON is a registered trademark of E.I. Du Pont | 19 |
De Nemours and Company. |
|
