![](/images/new-backgrounds/1322766/32276621x1.webp)
USING YOUR WASHER
UNDERSTANDING WHAT HAPPENS IN EACH CYCLE
When the Cycle Control knob is set to a number and pulled out, the washer fills (to the selected load size) before agitation and timing start. The washer begins agitating immediately after filling; agitation occurs with the washer lid up or down.
During agitation, the XTRA ROLL ACTION* agitator creates a continuous
rollover action that
provides a thorough cleaning of the wash load.
After agitation starts, the Cycle Control knob turns clockwise until it points to an Off area and the cycle ends.
NOTE: The washer pauses briefly throughout each cycle. These pauses are normal for washer operation.
Sequence of cycles
WASH
Fill
▼
Wash selected time
▼
Drain
No agitation
▼
Spin
▼
RINSE
Continues to
▼
Spray
▼
Spin
▼
Off
11