Whirlpool W10026592A Problem Cause Solution Residue or lint, On load, Tearing, Stains on load

Models: W10026592A

1 19
Download 19 pages 4.06 Kb
Page 15
Image 15

TROUBLESHOOTING

COMMON WASHING PROBLEMS (CONT.)

 

Problem...

Cause...

Solution...

 

 

 

 

 

 

 

Residue or lint

Improper sorting.

Sort lint givers (towels, chenille) from

 

 

 

on load

 

lint takers (corduroy, synthetics). Also

 

 

 

 

sort by color.

 

 

 

Overloading.

Lint can be trapped in load if over-

 

 

 

 

loaded. Wash smaller loads.

 

 

 

Paper or tissue in pockets.

Clean out pockets before washing.

 

 

 

Not enough detergent.

Use enough detergent to hold

 

 

 

 

lint in water.

 

 

 

Detergent not dissolving.

Use wash water warmer than 70°F

 

 

 

 

(21°C).

 

 

 

Wash water colder than 70°F (21°C).

Use wash water warmer than 70°F

 

 

 

 

(21°C).

 

 

Tearing

Overloading. Improper use of washer.

Loads should move freely during

 

 

 

 

wash. Wash smaller loads.

 

 

 

Improper use of chlorine bleach.

Do not pour chlorine bleach directly

 

 

 

 

on load. Wipe up bleach spills.

 

 

 

 

Undiluted bleach will damage fabrics.

 

 

 

Sharp items not removed from pockets;

Clean out pockets before washing.

 

 

 

fasteners not fastened.

Zip zippers before washing.

 

 

 

Items damaged before washing.

Mend rips and broken threads in

 

 

 

 

seams before washing.

 

 

Stains on load

Use of liquid fabric softener.

Do not use liquid fabric softener. Use

 

 

 

 

a fabric softener sheet in the dryer

 

 

 

Iron (rust) in water.

instead.

 

 

 

Install an iron filter.

 

 

 

Not enough detergent used, causing soil

Use enough detergent to remove soil

 

 

 

to be redeposited.

and hold it in suspension.

 

 

 

Dye transfer due to not sorting loads

Sort dark clothing from whites and

 

 

 

properly.

lights.

 

 

 

Dye transfer due to not unloading

Unload the washer as soon as it

 

 

 

washer promptly.

stops.

 

 

 

 

 

 

 

Load is wrinkled

Not removing load promptly.

Unload the washer as soon as it

 

 

 

Wrong spin speed for fabrics being

stops.

 

 

 

Use a setting with a low spin speed.

 

 

 

washed.

 

 

 

 

 

 

Overloading.

Loads should move freely during

 

 

 

 

wash. Wash smaller loads.

 

 

 

Wash water not warm enough to relax

If safe for fabric, use 100°F (38°C)

 

 

 

wrinkles.

wash water. Use cold rinse water.

 

 

 

Hoses reversed.

Reverse hoses.

 

 

 

 

 

 

 

 

 

 

 

continued on next page

15

Page 15
Image 15
Whirlpool W10026592A warranty Problem Cause Solution Residue or lint, On load, Tearing, Stains on load, Load is wrinkled