Whirlpool W10026592A warranty Rinse and Spin cycle, Pre-Wash Cycle, Soak Cycle

		USING YOUR WASHER
SELECTING A FABRIC SPEED AND CYCLE TIME (CONT.)
Rinse and Spin cycle	• The Soak cycle automatically advances into the
When washing heavily soiled clothes, or washing
special-care items, you may find an extra rinse and	Pre-Wash cycle.
spin is needed. An extra spin only may help shorten	• After the cycle ends, set a new wash cycle.
drying times for some heavy fabrics or special-care	Pre-Wash Cycle
items by removing excess water.
• For a rinse and spin, turn the Cycle Control knob to	The Pre-Wash cycle features 4 minutes of agitation
	to help remove heavy soils and stains that need
Rinse Only.
	pretreatment. This cycle provides additional washing
• For a spin only, turn the Cycle Control knob to Spin
	prior to the desired cycle. Because the Pre-Wash
Only.
	cycle does not rinse, a new wash cycle should be
NOTE: Rinse water temperature and spin speed will
	selected after the Pre-Wash cycle ends.
be the same as your previous wash cycle unless
	For high speed agitation, set the Fabric/Speed
new selections are made.
Soak Cycle	Select to Cotton or Perm Press.
	For low speed agitation, set the Fabric/Speed
The Soak cycle features brief periods of agitation	Select to Delicates.
and soak time to help remove heavy soils and stains
	For intermittent agitation, set the Fabric/Speed
that need pretreatment. Select 10 or 22 minutes of
	Select to Handwashables.
soak time, depending on the soil level of your load.
	• Select a Soak/Prewash Temperature to match
For high speed agitation, set the Fabric/Speed
Select to Cotton or Perm Press.	the type of fabric and soils in your load.
	• Use Pre-Wash for heavily soiled loads that need
For low speed agitation, set the Fabric/Speed
	more than one wash.
Select to Delicates.
	• After the cycle ends, set a new wash cycle.
For intermittent agitation, set the Fabric/Speed
Select to Handwashables.
• Select a Soak/Prewash Temperature to match the
type of fabric and soils in your load.
• Use the amount of detergent or presoak additive
recommended by manufacturer.

ACCUWASH* TEMPERATURE CONTROL SYSTEM

Your washer uses the ACCUWASH automatic temperature control in the Normal wash cycle and Rinse and Spin cycle. ACCUWASH maintains a uniform water temperature by regulating incoming hot and cold water. This helps eliminate undissolved detergent and ensures consistent cleaning results.

•Select a wash water temperature of 75°F (24°C) for items that bleed, handwashables, or lightly soiled items.

•Select a wash water temperature of 100°F (38°C) for cleaning whites and bright colors or moderately to heavily soiled items.

	75°	75°
	Cold	75°
Cold			100°
Cold			Cold

9