Whirlpool W100329708 Installation Requirements, Tools and Parts, Tools needed, Parts supplied

In the State of Massachusetts, the following installation instructions apply:

■Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by the State of Massachusetts.

■If using a ball valve, it shall be a T-handle type.

■A flexible gas connector, when used, must not exceed 3 feet.

WARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Connect anti-tip bracket to rear range foot.

Reconnect the anti-tip bracket, if the range is moved.

Failure to follow these instructions can result in death or serious burns to children and adults.

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Tools needed

■Level

■³⁄₈" drive ratchet

■Tape measure

■Flat-blade screwdriver

■Phillips screwdriver

■Hand or electric drill

■Wrench or pliers

■7 mm combination wrench

■Pipe wrench

■¹⁄₈" (3.2 mm) drill bit (for wood floors)

■³⁄₁₆" (4.8 mm) carbide-tipped masonry drill bit (for concrete/ ceramic floors)

■Pipe-joint compound resistant to LP gas

■Noncorrosive leak-detection solution

Parts supplied

Check that all parts are included.

A

B

C

A.Anti-tip bracket

B.Plastic anchors (2)

C.#10 x 1¹⁄₂" screws (2)

■Anti-tip bracket must be securely mounted to subfloor. Thickness of flooring may require longer screws to anchor bracket to subfloor. Longer screws are available from your local hardware store.

Parts needed

Check local codes and consult gas supplier. Check existing gas and electrical supply. See “Electrical Requirements” and “Gas Supply Requirements” section.

3