■To minimize possible shock hazard, the cord must be plugged into a mating, earthing-type outlet, earthed in accordance with local codes and ordinances. If a mating outlet is not available, it is the personal responsibility and obligation of the customer to have the properly earthed outlet installed by a qualified electrician.

■If codes permit and a separate earth wire is used, it is recommended that a qualified electrician determine that the earth path is adequate.

■The installer is to confirm, through the local power supply authority, if necessary, that the machine is connected to a power supply with a maximum impedance of 0.068 + j0.043 ohms for phases (RA + jXA) and 0.0455 + j0.02844 ohms for neutral (RN + jXN).

■Do not earth to a gas pipe.

■Check with a qualified electrician if you are not sure the washer is properly earthed.

■Do not have a fuse in the neutral or earth circuit.

EARTHING INSTRUCTIONS

For an earthed, cord-connected washer:

This washer must be earthed. In the event of a malfunction or breakdown, earthing will reduce the risk of electrical shock by providing a path of least resistance for electric current. This washer is equipped with a cord having an equipment-earthing conductor and an earthing plug. The plug must be plugged into an appropriate outlet that is properly installed and earthed in accordance with all local codes and ordinances.

WARNING: Improper connection of the equipment- earthing conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly earthed.

Do not modify the plug provided with the appliance – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

For a permanently connected washer:

This washer must be connected to an earthed metal, permanent wiring system, or an equipment earthing conductor must be run with the circuit conductors and connected to the equipment-earthing terminal or lead on the appliance.

INSTALLATION INSTRUCTIONS

Before You Start

WARNING

Straight power cord

Excessive Weight Hazard

Use two or more people to move and install washer. Failure to do so can result in back or other injury.

NOTE: To avoid floor damage, set the washer onto cardboard before moving across floor.

Remove Shipping Materials

Removing the shipping material is necessary for proper operation. If the shipping material is not removed, the washer will make excessive noise.

1.Move the washer to within approximately 90 cm (3 ft) of its final location.

2.The washer must be in the upright position and not tilted before removing the shipping material.

3.Locate the yellow shipping materials on the rear of the machine, near the bottom. Follow the steps for your particular model, either the one with the straight power cord and cord restraint or the looped power cord version.

Straight power cord

1.Remove power plug and yellow strap from machine base to release the rear leveling system.

4

Page 3 Page 5
Page 4
Image 4
Whirlpool W10038100 Installation Instructions, Before You Start, Remove Shipping Materials, Straight power cord
Page 3 Page 5

W10038100 specifications

The Whirlpool W10038100 is a highly regarded kitchen appliance designed to optimize the cooking experience while enhancing culinary capabilities. This model seamlessly blends style, efficiency, and functionality, making it suitable for both amateur cooks and seasoned chefs alike.

One of the standout features of the W10038100 is its advanced temperature management system. This technology ensures that heat is evenly distributed throughout the cooking space, allowing for perfectly cooked dishes every time. The system minimizes hot spots and cold zones that can lead to uneven cooking, making it ideal for roasting meats or baking cakes.

The Whirlpool W10038100 incorporates innovative self-cleaning capabilities. This feature not only saves time but also ensures that maintenance is minimal. The self-cleaning function operates at high temperatures to burn off residue, leaving the appliance clean and ready for the next cooking adventure with just a touch of a button.

In terms of design, the W10038100 boasts a sleek, modern appearance that fits seamlessly into any kitchen aesthetic. Its stainless steel finish not only provides a durable surface that resists fingerprints and smudges but also adds a touch of elegance to your culinary space. The user-friendly interface features clear digital displays and intuitive controls that simplify the cooking process.

The W10038100 also leverages smart technology, allowing users to connect their devices and monitor cooking progress remotely. This connectivity means that whether you’re in the living room or at the grocery store, you can adjust cooking settings or check on your meal’s status through a smartphone app. This level of convenience is particularly beneficial for busy households juggling multiple tasks.

Energy efficiency is another highlight of the Whirlpool W10038100. This model is designed to consume less energy than traditional appliances without sacrificing performance. This not only benefits the environment but also leads to reduced utility bills—a win-win for environmentally conscious consumers.

Furthermore, the appliance includes multiple cooking modes, allowing users to experiment with various techniques such as baking, broiling, and sautéing. With versatile options, it accommodates various recipes and cooking styles, making every meal a possibility.

In summary, the Whirlpool W10038100 stands out for its excellent temperature management, self-cleaning capabilities, modern design, smart technology, energy efficiency, and versatile cooking modes. This combination of features makes it a top choice for anyone looking to elevate their kitchen experience.
Top Page Image Contents