NOTE: Do not overtighten or use tape or sealants on the valve. Damage to the valves can result.

5.Attach the cold water hose to the top inlet valve.

6.Screw on coupling by hand until it is seated on the washer.

7.Using pliers, tighten the couplings with an additional two-thirds turn.

NOTE: Do not overtighten or use tape or sealants on the valve. Damage to the valves can result.

Check for leaks

Turn on the water faucets and check for leaks. A small amount of water might enter the washer. You will drain this later.

NOTE: Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Record hose installation or replacement dates for future reference.

■If you connect only one water hose, you must cap off the remaining water inlet port.

■Periodically inspect and replace hoses if bulges, kinks, cuts, wear, or leaks are found.

Secure the Drain Hose

1.Remove the shipping strap from the power cord. Drape the power cord over the console.

2.Remove any cardboard used to move washer.

Level the Washer

Properly leveling your washer avoids excessive noise and vibration.

Install the Front Leveling Feet

1.Prop up the front of the washer about 10.2 cm (4") with a wood block or similar object. The block needs to support the weight of the washer.

10.2 cm (4")

A

A. Threaded holes for feet

2.Screw the locknut onto each foot to within 2.5 cm (1") of the foot base.

2.5 cm

(1")

Beaded tie strap

3.Wrap the drain hose to the laundry tub leg or drain standpipe with the beaded tie strap. Push fastener into the nearest hole in the beaded tie strap. See view A or B.

ABC

If the washer faucets and the drain standpipe are recessed, put the formed end of the drain hose into the standpipe. Tightly wrap the tie strap around the water inlet hoses and the drain hose. See view C.

3.Screw the feet into the threaded holes at the front corner of the washer until the nuts touch the washer. Twist the feet to install.

NOTE: Do not tighten the nuts until the washer is level.

4.Tilt the washer back and remove the wood block. Gently lower the washer to the floor.

Steps in Final Location

1.Slide the washer to its final location.

7

Page 6 Page 8
Page 7
Image 7
Whirlpool W10038100 Secure the Drain Hose, Level the Washer, Check for leaks, Install the Front Leveling Feet
Page 6 Page 8

W10038100 specifications

The Whirlpool W10038100 is a highly regarded kitchen appliance designed to optimize the cooking experience while enhancing culinary capabilities. This model seamlessly blends style, efficiency, and functionality, making it suitable for both amateur cooks and seasoned chefs alike.

One of the standout features of the W10038100 is its advanced temperature management system. This technology ensures that heat is evenly distributed throughout the cooking space, allowing for perfectly cooked dishes every time. The system minimizes hot spots and cold zones that can lead to uneven cooking, making it ideal for roasting meats or baking cakes.

The Whirlpool W10038100 incorporates innovative self-cleaning capabilities. This feature not only saves time but also ensures that maintenance is minimal. The self-cleaning function operates at high temperatures to burn off residue, leaving the appliance clean and ready for the next cooking adventure with just a touch of a button.

In terms of design, the W10038100 boasts a sleek, modern appearance that fits seamlessly into any kitchen aesthetic. Its stainless steel finish not only provides a durable surface that resists fingerprints and smudges but also adds a touch of elegance to your culinary space. The user-friendly interface features clear digital displays and intuitive controls that simplify the cooking process.

The W10038100 also leverages smart technology, allowing users to connect their devices and monitor cooking progress remotely. This connectivity means that whether you’re in the living room or at the grocery store, you can adjust cooking settings or check on your meal’s status through a smartphone app. This level of convenience is particularly beneficial for busy households juggling multiple tasks.

Energy efficiency is another highlight of the Whirlpool W10038100. This model is designed to consume less energy than traditional appliances without sacrificing performance. This not only benefits the environment but also leads to reduced utility bills—a win-win for environmentally conscious consumers.

Furthermore, the appliance includes multiple cooking modes, allowing users to experiment with various techniques such as baking, broiling, and sautéing. With versatile options, it accommodates various recipes and cooking styles, making every meal a possibility.

In summary, the Whirlpool W10038100 stands out for its excellent temperature management, self-cleaning capabilities, modern design, smart technology, energy efficiency, and versatile cooking modes. This combination of features makes it a top choice for anyone looking to elevate their kitchen experience.
Top Page Image Contents