Whirlpool W10097012B, W10097015B SP warranty Cycle Guide Automatic Cycles, Cycle Guide Timed DRY

CYCLE GUIDE — AUTOMATIC CYCLES

Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.

AUTOMATIC DRY - Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.

Depending on model, temperature may be selected on cycle knob or be a separate control.

Items to dry:	Cycle:	Drying	Dryness	Available	Cycle Details:
		Temperature:	Level:	Options:
Jeans, heavy work	Automatic	High	Normal	Damp Dry Signal	Gives the best drying in the shortest time.
clothes, towels				Wrinkle Shield™	Drying time varies based on fabric type,
				Cycle Signal	load size, and dryness setting.
Work clothes, medium	Automatic	Medium	Normal	Damp Dry Signal	Select a drying temperature based on
weight fabrics, sheets				Wrinkle Shield™	the fabrics in your load. If you are unsure
				Cycle Signal	of the temperature to select for a load,
					select the lower setting rather than the
Casual, shirts, pants,	Automatic	Low	Normal	Damp Dry Signal
					higher setting.
lightweight items,				Wrinkle Shield™
synthetics, delicates,				Cycle Signal
athletic wear

NOTE: If loads do not seem as dry as you would like, select More Dry next time you dry a similar load. If loads seem drier than you like, select Less Dry next time you dry a similar load.

CYCLE GUIDE — TIMED DRY

Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.

TIMED DRY - Will run the dryer for the specified time on the control. Depending on model, temperature may be selected on cycle knob or be a separate control.

Items to dry:	Cycle:	Drying	Available	Cycle Details:
		Temperature:	Options:
Any load	Timed Dry	Any	Temp	Dries items to a damp level for items that
			Wrinkle Shield™	do not require an entire drying cycle.
			Time Adjustment	Select a drying temperature based on the
				fabrics in your load. If you are unsure of the
				temperature to select for a load, select the
				lower setting rather than the higher setting.
Rubber, plastic, heat	Timed Dry	Air Dry	Temp	Use a no heat (air dry) setting for foam,
sensitive fabrics			Wrinkle Shield™	rubber, plastic, or heat-sensitive fabrics.
			Time Adjustment
SPECIAL SETTINGS: These settings are added at the end of certain cycles to reduce wrinkling.
Any load	Wrinkle	No heat	N/A	After a cycle is complete, the load is
	Shield™			periodically tumbled to avoid wrinkles until
				you are ready to remove it.

Setting the Drying Temperature

If your dryer has multiple heat settings:

A High heat setting may be used for drying heavyweight items such as towels and work clothes.

A Low to Medium heat setting may be used for drying medium-weight items such as sheets, blouses, dresses, underwear, permanent press fabrics, and some knits.

Use a no heat (air dry) setting for foam, rubber, plastic, or heat-sensitive fabrics.

Line dry bonded or laminated fabrics.

NOTE: If you have questions about drying temperatures for various loads, refer to the care label directions.

6