5. Remove screws from door | 8. Attach door hinges |
Remove screws at top, bottom, and side of door
(5 screws). Keep door screws separate from hinge screws as they are different sizes. Holding door over towel on dryer, grasp sides of outer door and lift to separate it from inner door.
NOTE: Do not pry apart with putty knife or screwdriver. Do not pull on door seal or plastic door catches.
6. Rotate outer door
Take outer door and rotate it 180º and set it back down on inner door. Be certain to keep cardboard spacer centered between doors. Reattach outer door panel to inner door panel so handle is on the side where hinges were just removed. Insert 5 door screws.
7. Flip door over
Flip door over so handle side is down.
Reattach door hinges to dryer door so that the larger hole is at the bottom of the hinge.
9. Remove and transfer plugs
Remove the 4 screws that attach 2 plugs on the left side. Transfer plugs to opposite side using the same 4 screws.
19
