10. Remove door strike | 13. Remove door strike plug |
Remove door strike from dryer cabinet and set aside.
11. Remove and transfer plugs
Remove the 4 screws that attach 2 plugs on the left side. Transfer plugs to opposite side using the same 4 screws.
12. Insert screws in hinge holes on dryer cabinet
NOTE: 2 people maybe needed to reinstall door.
Insert screws into the bottom holes on left side of dryer cabinet. Tighten screws halfway. Position door so large end of door hinge slot is over screws. Slide door up so screws are in bottom of slots. Tighten screws. Insert and tighten top screws in hinges.
Remove door strike plug. Insert the door strike removed in Step 10 into hole and secure with screw. Insert door strike plug into original door strike hole and secure with screw.
14. Check door strike alignment
Close door and check that door strike aligns with door catch. If it is needed, slide door catch left or right within slot to adjust alignment.
Troubleshooting
See the “Use and Care Guide” or visit our website and reference “Frequently Asked Questions” to possibly avoid the cost of a service call.
22
