Add a garment

This washer allows an 8-minute period in which other garments may be added to the load. You can add items to the washer if the Add a garment status light is glowing.

To add items when Add a garment light is glowing

1.Select PAUSE/CANCEL once. The washer door unlocks, and items can be added.

2.To continue the cycle, close the door and select and hold START (for approximately 1 second).

To add items when the Add a garment light is not glowing

1.Select PAUSE/CANCEL twice. This will cancel the wash cycle and options. The washer door unlocks, and items can be added.

2.Close the door, press POWER and select the new cycle and options. Select and hold START (for approximately 1 second).

Done

The Done status light stays on for 60 minutes after the cycle is complete, and then the washer shuts off.

Controls Lock/Unlock

The Controls Lock avoids unintended use of the washer. You can also use the control lock feature to avoid unintended cycle or option changes during a cycle. When Controls Lock is lit, all buttons are disabled except for Pause/Cancel and Start. You can lock the controls while the washer is operating.

To lock the controls

Press and hold CONTROLS LOCK/UNLOCK for 3 seconds.

The status light next to the CONTROLS LOCK/UNLOCK button will glow.

To unlock the controls

Press and hold CONTROLS LOCK/UNLOCK for 3 seconds until the status light turns off.

NOTE: To lock or unlock the controls when the washer is off, press and hold CONTROLS LOCK/UNLOCK for 3 seconds.

Door Locked

When the status light glows, the door is locked.

Sensing/Revising Estimated Time

The cycle times vary automatically based on your water pressure, water temperature, detergent, and clothes load.

The washer will automatically sense the progress in the cycle and adjust the Estimated Time Remaining display. While the washer is sensing, the estimated time will flash and the Sensing status light will glow. When the sensing is complete, the flashing stops, the status light goes off and the Estimated Time Remaining display is updated.

The cycle time will be extended if oversudsing occurs or the load is unbalanced. The SUD routine removes extra suds and assures proper rinsing of your garments. See “Troubleshooting.” During the unbalance routine the time displayed may pause until this activity is complete, then resume with the remainder of the cycle.

Cycles

Cycles can be selected by turning the Cycle Control knob to the desired cycle. Each cycle is designed for different types of fabric and soil levels. The modifier indicator lights, on the right-hand side of the panel, will change as cycles are selected.

Each cycle has a preset Soil Level (estimated cycle time), Water Temperature and Spin Speed, and may have preset options. The preset settings provide the recommended fabric care for the selected cycle.

The preset settings will glow green to show the preselected options and modifiers, and be changed anytime before START is pressed. Not all options and modifiers are available with all cycles. Available selections glow amber. (To change settings after the cycle has started, press PAUSE/CANCEL once, then select the desired settings. Press START to continue the cycle.)

Powdered detergents may not dissolve well in a slow-speed cycle. For best results, use liquid detergent in slow-speed cycles.

Preset cycle settings

Each cycle has a preset Soil Level (cycle time), Water Temperature, and Spin Speed. The preset settings provide the recommended fabric care for the selected cycle. See chart.

Cycle

Soil Level

Water Temp

Spin Speed

 

(cycle time)

 

 

 

 

 

 

Sanitary

Normal

Super Hot/Cold

High

 

(1:50)

 

 

 

 

 

 

Whitest

Normal

Hot/Cold

High

Whites

(1:15)

 

 

 

 

 

 

Heavy Duty

Normal

Hot/Cold

High

 

(1:05)

 

 

 

 

 

 

Normal/

Normal

Warm/Cold

High

Casual

(0:50)

 

 

 

 

 

 

Delicate

Normal

Warm/Cold

Medium

 

(0:40)

 

 

 

 

 

 

Hand

Normal

Cold/Cold

Low

Washables

(0:30)

 

 

 

 

 

 

Clean

 

N/A

High

Washer

 

 

 

 

 

 

 

Soak

Normal

Warm/Cold

No Spin

 

(0:30)

 

 

 

 

 

 

Rinse/Spin

N/A

Cold/Cold

High

 

(0:20)

 

 

 

 

 

 

Drain/Spin

N/A

N/A

High

 

(0:11)

 

 

 

 

 

 

14

Page 14
Image 14
Whirlpool W10158200A manual Cycles

W10158200A specifications

The Whirlpool W10158200A is an innovative appliance designed to enhance modern kitchens with its advanced features and user-friendly characteristics. This product, primarily known as a refrigerator water filter, is engineered to provide cleaner and better-tasting water and ice, making it an essential component for households that prioritize health and convenience.

One of the main features of the W10158200A is its ability to reduce contaminants. This filter effectively eliminates chlorine taste and odor, lead, mercury, and several other impurities, ensuring that the water you use for drinking, cooking, and making ice is as pure as possible. The advanced filtration technology employed in this product not only enhances the quality of water but also improves the flavor, allowing you to enjoy every sip or glass of ice.

Another notable characteristic of the Whirlpool W10158200A is its easy installation process. The filter is designed to fit securely and seamlessly into compatible Whirlpool refrigerators, making it accessible for even those who may not have extensive DIY experience. Additionally, the straightforward replacement process means that maintaining clean water is a hassle-free task. Users can quickly change the filter without special tools, which encourages regular upkeep and ensures optimal performance.

This water filter boasts a considerable lifespan, typically lasting up to six months or filtering about 200 gallons of water, depending on usage. This longevity allows families to enjoy consistent quality without frequent replacements, making it both cost-effective and practical for everyday use.

Moreover, the W10158200A is designed with sustainability in mind. By providing an efficient filtration solution, this product helps reduce the reliance on bottled water, thus contributing to environmental conservation efforts. Using this filter can lead to less plastic waste while still ensuring that your home has access to safe and refreshing water.

In conclusion, the Whirlpool W10158200A stands out due to its advanced filtration capabilities, user-friendly design, sustainable benefits, and longevity. It is a reliable choice for those looking to improve the quality of their drinking water and enhance their culinary experiences. Embracing this innovative solution helps ensure that families enjoy not only the taste but also the peace of mind that comes with quality water.