2.Once the bolt is loose, move it to the center of the hole and completely pull out the bolt, including the plastic spacer covering the bolt.

3.Once all 4 bolts are removed discard bolt and spacers. Then pull the power cord through the opening of the rear panel and close the hole with the attached cap.

4.Close the bolt holes with the 4 transport bolt hole plugs.

NOTE: If the washer is to be transported at a later date, call your local service center. To avoid suspension and structural damage to your washer, it must be properly set up for relocation by a certified technician.

ConnecttheInletHoses

1.Insert new flat washers (supplied) into each end of the inlet hoses. Firmly seat the washers in the couplings.

AB

A.Coupling

B.Washer

2.Make sure the washer drum is empty.

3.Attach the hose with the red color indicator to the Hot (left) inlet valve. Attaching the red coupling first makes it easier to tighten connection with pliers. Screw on coupling by hand until it is seated on the washer.

4.Attach the hose with the blue color indicator to the Cold (right) water inlet valve. Screw on coupling by hand until it is seated on the washer.

HC

H. Hot water inlet

C. Cold water inlet

5.Using pliers, check the tightness of the hose couplings already attached to the washer.

NOTE: Do not overtighten. Damage to the coupling can result.

6.Attach hot water hose to the hot water faucet. Screw on coupling by hand until it is seated on the washer.

7.Attach cold water hose to the cold water faucet. Screw on coupling by hand until it is seated on the washer.

8.Using pliers, tighten the couplings with an additional two-thirds turn.

NOTE: Do not overtighten. Damage to the coupling can result.

9.Turn on the water faucets and check for leaks.

NOTE: Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Record hose installation or replacement dates on the hoses for future reference.

Periodically inspect and replace hoses if bulges, kinks, cuts, wear, or leaks are found.

RoutetheDrainHose

Proper routing of the drain hose protects your floors from damage due to water leakage. Read and follow these instructions.

Remove drain hose from washer cabinet

Gently pull the corrugated drain hose from the shipping clips.

Laundry tub drain or standpipe drain

Connect the drain hose form to the corrugated drain hose.

AB

A. Snap either end of the drain hose form to the drain hose at the point where the corrugation begins.

B. Bend drain hose over drain hose form and snap into place.

8

Page 7 Page 9
Page 8
Image 8
Whirlpool W10158200A manual ConnecttheInletHoses, RoutetheDrainHose, Remove drain hose from washer cabinet
Page 7 Page 9

W10158200A specifications

The Whirlpool W10158200A is an innovative appliance designed to enhance modern kitchens with its advanced features and user-friendly characteristics. This product, primarily known as a refrigerator water filter, is engineered to provide cleaner and better-tasting water and ice, making it an essential component for households that prioritize health and convenience.

One of the main features of the W10158200A is its ability to reduce contaminants. This filter effectively eliminates chlorine taste and odor, lead, mercury, and several other impurities, ensuring that the water you use for drinking, cooking, and making ice is as pure as possible. The advanced filtration technology employed in this product not only enhances the quality of water but also improves the flavor, allowing you to enjoy every sip or glass of ice.

Another notable characteristic of the Whirlpool W10158200A is its easy installation process. The filter is designed to fit securely and seamlessly into compatible Whirlpool refrigerators, making it accessible for even those who may not have extensive DIY experience. Additionally, the straightforward replacement process means that maintaining clean water is a hassle-free task. Users can quickly change the filter without special tools, which encourages regular upkeep and ensures optimal performance.

This water filter boasts a considerable lifespan, typically lasting up to six months or filtering about 200 gallons of water, depending on usage. This longevity allows families to enjoy consistent quality without frequent replacements, making it both cost-effective and practical for everyday use.

Moreover, the W10158200A is designed with sustainability in mind. By providing an efficient filtration solution, this product helps reduce the reliance on bottled water, thus contributing to environmental conservation efforts. Using this filter can lead to less plastic waste while still ensuring that your home has access to safe and refreshing water.

In conclusion, the Whirlpool W10158200A stands out due to its advanced filtration capabilities, user-friendly design, sustainable benefits, and longevity. It is a reliable choice for those looking to improve the quality of their drinking water and enhance their culinary experiences. Embracing this innovative solution helps ensure that families enjoy not only the taste but also the peace of mind that comes with quality water.
Top Page Image Contents