ElectricalRequirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

■A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical supply is required. A time-delay fuse or circuit breaker is recommended. It is recommended that a separate circuit serving only this appliance be provided.

■This washer is equipped with a power supply cord having a 3 prong ground plug.

■To minimize possible shock hazard, the cord must be plugged into a mating, grounded 3 prong outlet, grounded in accordance with local codes and ordinances. If a mating outlet is not available, it is the personal responsibility and obligation of the customer to have the properly grounded outlet installed by a qualified electrician.

■If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

■Do not ground to a gas pipe.

■Check with a qualified electrician if you are not sure the washer is properly grounded.

■Do not have a fuse in the neutral or ground circuit.

GROUNDING INSTRUCTIONS

For a grounded, cord-connected washer:

This washer must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electrical shock by providing a path of least resistance for electric current. This washer is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING: Improper connection of the equipment- grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded.

Do not modify the plug provided with the appliance – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

For a permanently connected washer:

This washer must be connected to a grounded metal, permanent wiring system, or an equipment grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the appliance.

INSTALLATION INSTRUCTIONS

RemoveTransportSystem

WARNING

Excessive Weight Hazard

Use two or more people to move and install washer. Failure to do so can result in back or other injury.

IMPORTANT: Position the washer so that the rear of the washer is within approximately 3 ft (90 cm) of its final location.

There are 4 bolts in the rear panel of the washer that support the suspension system during transportation. These bolts also retain the power cord inside the washer until the bolts are removed.

1.Using a 13 mm wrench, loosen each of the bolts.

7

Page 6 Page 8
Page 7
Image 7
Whirlpool W10158200A manual Installation Instructions, ElectricalRequirements, RemoveTransportSystem
Page 6 Page 8

W10158200A specifications

The Whirlpool W10158200A is an innovative appliance designed to enhance modern kitchens with its advanced features and user-friendly characteristics. This product, primarily known as a refrigerator water filter, is engineered to provide cleaner and better-tasting water and ice, making it an essential component for households that prioritize health and convenience.

One of the main features of the W10158200A is its ability to reduce contaminants. This filter effectively eliminates chlorine taste and odor, lead, mercury, and several other impurities, ensuring that the water you use for drinking, cooking, and making ice is as pure as possible. The advanced filtration technology employed in this product not only enhances the quality of water but also improves the flavor, allowing you to enjoy every sip or glass of ice.

Another notable characteristic of the Whirlpool W10158200A is its easy installation process. The filter is designed to fit securely and seamlessly into compatible Whirlpool refrigerators, making it accessible for even those who may not have extensive DIY experience. Additionally, the straightforward replacement process means that maintaining clean water is a hassle-free task. Users can quickly change the filter without special tools, which encourages regular upkeep and ensures optimal performance.

This water filter boasts a considerable lifespan, typically lasting up to six months or filtering about 200 gallons of water, depending on usage. This longevity allows families to enjoy consistent quality without frequent replacements, making it both cost-effective and practical for everyday use.

Moreover, the W10158200A is designed with sustainability in mind. By providing an efficient filtration solution, this product helps reduce the reliance on bottled water, thus contributing to environmental conservation efforts. Using this filter can lead to less plastic waste while still ensuring that your home has access to safe and refreshing water.

In conclusion, the Whirlpool W10158200A stands out due to its advanced filtration capabilities, user-friendly design, sustainable benefits, and longevity. It is a reliable choice for those looking to improve the quality of their drinking water and enhance their culinary experiences. Embracing this innovative solution helps ensure that families enjoy not only the taste but also the peace of mind that comes with quality water.
Top Page Image Contents