Ice Maker

(on somemodels)

Turning the Ice Maker On/Off

To turn the ice maker ON, simply lower the wire shutoff arm.

To manually turn the ice maker OFF, lift the wire shutoff arm to the OFF (arm up) position and listen for the click.

NOTE: Your ice maker has an automatic shutoff. As ice is made, the ice cubes will fill the ice storage bin and the ice cubes will raise the wire shutoff arm to the OFF (arm up) position. Do not force the wire shutoff arm up or down.

Ice Production Rate

■The ice maker should produce a complete batch of ice approximately every 3 hours.

■To increase ice production, lower the freezer and refrigerator temperature. See “Using the Controls.” Wait 24 hours between adjustments.

Remember

■Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced.

■The quality of your ice will be only as good as the quality of the water supplied to your ice maker. Avoid connecting the ice maker to a softened water supply. Water softener chemicals (such as salt) can damage parts of the ice maker and lead to poor quality ice. If a softened water supply cannot be avoided, make sure the water softener is operating properly and is well maintained.

■Do not store anything on top of the ice maker or in the ice storage bin.

Water Dispenser

(on somemodels)

IMPORTANT:

■After connecting the refrigerator to a water source, flush the water system. Press the button on the dispenser for

5 seconds, then release it for 5 seconds. Repeat until water begins to flow. Once water begins to flow, continue depressing and releasing the dispenser button (5 seconds on, 5 seconds off) for an additional 2 minutes. This will flush air from the filter and water dispensing system. Additional flushing may be required in some households. As air is cleared from the system, water may spurt out of the dispenser.

NOTE: After 5 minutes of continuous dispensing, the dispenser will stop dispensing water to avoid flooding. To continue dispensing, press the dispenser button again.

■Allow 24 hours for the refrigerator to cool down and chill water. Dispense enough water every week to maintain a fresh supply.

Dispensing Water

1.Hold a container under the dispenser while pressing the button.

2.Release the button to stop dispensing.

Water Filtration System

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.

The water filter is located in the upper right-hand corner of the refrigerator compartment. You should change the water filter at least every 6 months. If the water flow to the water dispenser or ice maker decreases noticeably before 6 months have passed, replace the water filter more often.

Replacing the Water Filter

To purchase a replacement water filter, model 67003523 Part Number 4396395, contact your dealer or call 1-800-442-9991U.S.A. or 1-800-807-6777Canada.

IMPORTANT: Air trapped in the water system may cause water and filter to eject. Always dispense water for at least 2 minutes before removing the filter or blue bypass cap.

1.Turn filter counterclockwise to remove.

2.Remove sealing label from replacement filter and insert the filter end into the filter head.

3.Turn the filter clockwise until it stops. Snap the filter cover closed.

NOTE: The dispenser feature may be used without a water filter installed. Your water will not be filtered. If this option is chosen, replace the filter with the blue bypass cap.

13

Page 12 Page 14
Page 13
Image 13
Whirlpool W10175487A installation instructions Ice Maker, Water Dispenser, Water Filtration System
Page 12 Page 14

W10175487A specifications

The Whirlpool W10175487A is a high-efficiency washer and dryer that embodies modern home appliance technology. Designed to seamlessly integrate into any laundry space, it efficiently combines functionality with user-friendly features to streamline the washing process.

One of the main characteristics of the W10175487A is its advanced wash system, which utilizes an adaptive wash action. This feature tailors the washing motion based on the load size and fabric type, ensuring that clothes receive a thorough clean without being subjected to unnecessary wear and tear. This not only helps in maintaining the quality of your garments but also reduces energy consumption.

The machine is equipped with a large capacity drum that accommodates sizeable laundry loads, making it ideal for families. This generous size means fewer washes are required, saving both time and resources. Furthermore, the washer's load sensing technology automatically adjusts the water level, ensuring that each wash is as efficient as possible.

In terms of energy efficiency, the Whirlpool W10175487A boasts Energy Star certification, a testament to its low energy consumption and minimized environmental impact. The energy-saving mode allows for even further reduction in electricity use while still delivering superior cleaning performance.

The dryer that accompanies this washer offers an array of key features, including multiple drying cycles that cater to diverse fabric types. From delicate items to heavy-duty towels, the drying options are versatile enough to accommodate all needs. An integrated moisture sensor ensures clothes are dried to the perfect level, preventing shrinkage and fabric damage.

User-friendliness is a core focus of the W10175487A, evident in its easy-to-use control panel. With clearly marked settings and a simple interface, navigating through various wash and dry cycles is effortless, making laundry day less of a chore.

In summary, the Whirlpool W10175487A stands out for its advanced washing technology, energy-efficient design, large capacity, and user-friendly features. Ideal for households seeking a reliable laundry solution, it offers a perfect blend of performance and convenience, enhancing the overall laundry experience.
Top Page Image Contents