Manuals / Whirlpool / Kitchen Appliance / Refrigerator

Whirlpool W10175487A Refrigerator Doorsand Drawer, Connect to Refrigerator, Style

Models: W10175487A

1 58
Download 58 pages 20.12 Kb
Page 5
Image 5

Connect to Refrigerator

Depending on your model, the water line may come down from the top or up from the bottom. Follow the connection instructions for your model.

Style 1

1.Remove plastic cap from water valve inlet port. Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten. Confirm copper tubing is secure by pulling on copper tubing.

2.Create a service loop with the copper tubing. Avoid kinks when coiling the copper tubing. Secure copper tubing to refrigerator cabinet with a “P” clamp.

A

B

C

D

E

A. Copper tubing

D. Compression sleeve

B. “P” clamp

E. Water valve inlet port

C. Compression nut

 

3.Turn on water supply to refrigerator and check for leaks. Correct any leaks.

Style 2

1.Create a service loop (minimum diameter of 2 ft [61 cm]) with the copper tubing. Avoid kinks when coiling the copper tubing.

2.Remove the plastic cap from water valve inlet port. Place a compression nut and sleeve on the copper tubing.

3.Insert the end of the copper tubing into the water valve inlet port. Shape tubing slightly so that the tubing feeds straight into the port to avoid kinks.

4.Slide the compression nut over the sleeve and screw into the water valve inlet port.

A

B

C

D

A. Plastic water tubing

C. Compression nut

B. Sleeve

D. Copper tubing

5.Using an adjustable wrench, hold the nut on the plastic water line to keep it from moving. Then, with a second wrench turn the compression nut on the copper tubing counterclockwise to completely tighten. Do not overtighten.

 

A

 

B

 

C

 

D

 

E

A. Plastic water line

D. Copper tubing

B. Water valve inlet port

E. “P” clamp

C. Compression nut

 

6.Check connection by pulling on copper tubing. Attach copper tubing to refrigerator cabinet with a “P” clamp. Turn on water supply to refrigerator and check for leaks. Correct any leaks.

Complete the Installation

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug into a grounded 3 prong outlet.

NOTE: Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced. Allow 3 days to completely fill the ice container.

Refrigerator Door(s)and Drawer

TOOLS NEEDED: ⁵⁄₁₆", ³⁄₈", ¹⁄₄" hex-head socket wrench, a #2 Phillips screwdriver, and a flat-blade screwdriver.

IMPORTANT:

■Your refrigerator may have a standard reversible refrigerator door (Style 1) with either a freezer door or freezer drawer, or French doors (Style 2). Follow the instructions specific to the door style of your model.

■All graphics referenced in the following instructions are included later in this section after “Final Steps.” The graphics shown for the standard door (Style 1) are for a right-hand swing refrigerator (hinges factory installed on the right).

■If you only want to remove and replace the doors see “Remove Doors and Hinges” and “Replace Doors and Hinges.”

■Before you begin, turn the refrigerator control OFF, and remove food and adjustable door or utility bins from the doors.

5

Page 4 Page 6
Page 5
Image 5
Whirlpool W10175487A Refrigerator Doorsand Drawer, Connect to Refrigerator, Style, Complete the Installation
Page 4 Page 6

W10175487A specifications

The Whirlpool W10175487A is a high-efficiency washer and dryer that embodies modern home appliance technology. Designed to seamlessly integrate into any laundry space, it efficiently combines functionality with user-friendly features to streamline the washing process.

One of the main characteristics of the W10175487A is its advanced wash system, which utilizes an adaptive wash action. This feature tailors the washing motion based on the load size and fabric type, ensuring that clothes receive a thorough clean without being subjected to unnecessary wear and tear. This not only helps in maintaining the quality of your garments but also reduces energy consumption.

The machine is equipped with a large capacity drum that accommodates sizeable laundry loads, making it ideal for families. This generous size means fewer washes are required, saving both time and resources. Furthermore, the washer's load sensing technology automatically adjusts the water level, ensuring that each wash is as efficient as possible.

In terms of energy efficiency, the Whirlpool W10175487A boasts Energy Star certification, a testament to its low energy consumption and minimized environmental impact. The energy-saving mode allows for even further reduction in electricity use while still delivering superior cleaning performance.

The dryer that accompanies this washer offers an array of key features, including multiple drying cycles that cater to diverse fabric types. From delicate items to heavy-duty towels, the drying options are versatile enough to accommodate all needs. An integrated moisture sensor ensures clothes are dried to the perfect level, preventing shrinkage and fabric damage.

User-friendliness is a core focus of the W10175487A, evident in its easy-to-use control panel. With clearly marked settings and a simple interface, navigating through various wash and dry cycles is effortless, making laundry day less of a chore.

In summary, the Whirlpool W10175487A stands out for its advanced washing technology, energy-efficient design, large capacity, and user-friendly features. Ideal for households seeking a reliable laundry solution, it offers a perfect blend of performance and convenience, enhancing the overall laundry experience.