19. Tighten leveling feet
A |
When washer is level, hold the leveling foot to keep it from turning and use a 9/16” or 14 mm
HELPFUL TIP: You may want to prop washer again with wooden block, then make sure to recheck for levelness.
Complete Installation
CHECKLIST
qCheck electrical requirements. Be sure you have correct electrical supply and recommended grounding method.
qCheck that all parts are now installed. If there is an extra part, go back through steps to see what was skipped.
qCheck that you have all of your tools.
qCheck that yellow shipping materials were completely removed from back of washer.
qCheck that both water faucets are on.
qCheck for leaks around faucets and inlet hoses.
qRemove film from console and any tape remaining on washer.
qCheck that washer is plugged into a grounded 3 prong outlet.
qDispose of/recycle all packaging materials.
qRead “Washer Use” in your Washer User Instructions.
qTo test and clean your washer, measure 1/2 of normal recommended amount of powdered or liquid detergent and pour it into washer basket or detergent dispenser
(on some models). Close lid. Select any cycle. Start washer and allow to complete full cycle.
20. Plug into a grounded
3 prong outlet
8
