The Anti-Tip Bracket

The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without the anti- tip bracket fastened down properly.

Anti-Tip Bracket

WARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Connect anti-tip bracket to rear range foot.

Reconnect the anti-tip bracket, if the range is moved.

See the installation instructions for details.

Failure to follow these instructions can result in death or serious burns to children and adults.

Making sure the anti-tip bracket is installed:

• Slide range forward.

• Look for the anti-tip bracket securely attached to floor.

• Slide range back so rear range foot is under anti-tip bracket. Range Foot

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electrical shock, injury to persons, or damage when using the range, follow basic precautions, including the following:

■WARNING: TO REDUCE THE RISK OF TIPPING OF THE RANGE, THE RANGE MUST BE SECURED BY PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET SECURELY ATTACHED TO FLOOR, AND SLIDE RANGE BACK SO REAR RANGE FOOT IS UNDER ANTI-TIP BRACKET.

■WARNING: NEVER use this appliance as a space heater to heat or warm the room. Doing so may result in carbon monoxide poisoning and overheating of the oven.

■WARNING: NEVER cover any slots, holes or passages in the oven bottom or cover an entire rack with materials such as aluminum foil. Doing so blocks air flow through the oven and may cause carbon monoxide poisoning. Aluminum foil linings may also trap heat, causing a fire hazard.

■CAUTION: Do not store items of interest to children in cabinets above a range or on the backguard of a range – children climbing on the range to reach items could be seriously injured.

■Proper Installation – The range, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70. Be sure the range is properly installed and grounded by a qualified technician.

■This range is equipped with a three-prong grounding plug for your protection against shock hazard and should be plugged directly into a properly grounded receptacle. Do not cut or remove the grounding prong from this plug.

■Disconnect power before servicing.

■Injuries may result from the misuse of appliance doors or drawers such as stepping, leaning, or sitting on the doors or drawers.

■Maintenance – Keep range area clear and free from combustible materials, gasoline, and other flammable vapors and liquids.

■Storage in or on the Range – Flammable materials should not be stored in an oven or near surface units.

■Top burner flame size should be adjusted so it does not extend beyond the edge of the cooking utensil.

For self-cleaning ranges –

■Before Self-Cleaning the Oven – Remove broiler pan and other utensils. Wipe off all excessive spillage before initiating the cleaning cycle.

SAVE THESE INSTRUCTIONS

3

Page 2 Page 4
Page 3
Image 3
Whirlpool W10204320B, W10204511A warranty Important Safety Instructions, Anti-Tip Bracket
Page 2 Page 4

W10204320B, W10204511A specifications

The Whirlpool W10204511A and W10204320B are essential components in the realm of home appliance maintenance, designed to enhance the performance and efficiency of various Whirlpool washing machines and dishwashers. These parts are not merely accessories; they are integral to the optimal functioning of these appliances, ensuring longevity and reliability.

The W10204511A model is primarily known for its role as a washer drain pump. This pump is responsible for removing water from the washing machine’s drum after the wash and rinse cycles. Its robust design allows for efficient water extraction, which is critical for preventing water buildup and ensuring that clothing is properly washed. This can lead to better cleaning results and can also protect the machine from potential water damage over time. The durability of the pump is a crucial characteristic, as it is subjected to the rigors of regular use, making it essential for users who rely on their washing machines for consistently clean laundry.

On the other hand, the W10204320B model serves as a vital component for various Whirlpool dishwashers. Specifically, it functions as a wash impeller, which is responsible for directing water throughout the dishwasher during the wash cycle. This part is critical in ensuring that water reaches all areas of the dishwasher, providing powerful and effective cleaning for dishes, pots, and pans. Its innovative design helps enhance cleaning performance, allowing users to enjoy sparkling clean dishes after every cycle.

Both models showcase Whirlpool’s commitment to quality and performance. They are built with high-quality materials that support long-term use, minimizing the chances of wear and tear. Furthermore, these components are designed for easy installation, allowing homeowners to carry out repairs without needing professional assistance. This user-friendliness is an important feature that reflects Whirlpool’s understanding of customer needs.

In summary, the Whirlpool W10204511A and W10204320B represent the brand's dedication to producing parts that enhance appliance functionality. Their main features include high durability, efficient operation, and ease of installation, making them ideal choices for anyone looking to maintain or improve their Whirlpool appliances. Whether it's the efficient drainage of the washer or the effective washing of dishes, these components play a vital role in everyday home maintenance.
Top Page Image Contents