ELECTRONIC OVEN CONTROLS
ABC DE
F | G H I J | K L | M | N | O | P |
A. Upper oven settings | F. Lower oven settings |
| L. Warm zone |
|
| |
B. Oven display | G. Timer 1 |
|
| M. Lower oven cance |
| |
C. Upper oven cancel | H. Timer 2 |
|
| N. Lower oven light |
| |
D. Upper oven light | I. Clock |
|
| O. Favorites |
|
|
E. Number pads | J. Cook & Hold |
| P. Presets |
|
| |
| K. Delay |
|
|
|
|
|
Display
When power is first supplied to the appliance, a flashing time will appear on the display. See “Clock” section to set time of day.
If a flashing time appears at any other time, a power failure has occurred. Press CANCEL and reset the clock if needed.
When the oven is not in use, the display shows the time of day.
Cancel
The Cancel pad stops any function except the Clock, Timer, and Control Lock.
Clock
The clock can be set to display time in a
To Cancel:
Press and hold upper oven CANCEL and CLOCK for 3 seconds. The time of day will disappear from the display.
When the clock display is canceled, press CLOCK to briefly display the time of day.
To Restore:
Press and hold upper oven CANCEL and CLOCK for 3 seconds. The time of day will reappear from the display.
RangeLights
Oven Lights
While the oven door is closed, press UPPER or LOWER OVEN LIGHT to turn the light on and off. The oven light will come on when the oven door is opened. The oven light will not come on during the
To change the clock to 24-hour format:
1.Press and hold the upper oven CANCEL pad and FAVORITE pad for 3 seconds. “12 Hr” will flash in the display.
2.Press PRESETS to select “24 Hr”; press again to select “12 Hr.”
3.Set the time of day by following the “To Set” instructions.
To Set:
Before setting, make sure the oven and Timer are off.
1.Press CLOCK. The time of day and colon flash in the display.
2.Press the number pads to set the time of day.
3.Press CLOCK again or wait 4 seconds. The colon will remain on.
To recall the time of day when another time function is showing, press CLOCK.
Tones
Tones are audible signals, indicating the following:
Basic Functions
One tone
■Valid pad press
■Oven is preheating (long tone)
■Function has been entered
Two tones
■Invalid pad press
Four tones
■End of cycle
9