Whirlpool W10275146A Connecting the Dishwasher, Portable Dishwashers DP1040 model only, A B C

Models: W10275146A

1 7
Download 7 pages 50.63 Kb
Page 6
Image 6
Connecting the Dishwasher

Connecting the Dishwasher

Portable Dishwashers (DP1040 model only)

Portable Dishwashers (DP1040 model only)WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Connecting the Faucet Adapter

NOTE: A special adapter must be installed on the faucet before the dishwasher can be connected. Complete Installation Instructions and the adapter are packed with your dishwasher. (See the Installation Instructions.)

When moving your dishwasher, make sure the door is latched. Hold the dishwasher at the top front corners.

Preparing the faucet

1.Remove the screen holder or aerator, screen, and washer from the end of the faucet.

2.Use the faucet adapter kit that came with your portable dishwasher to modify the faucet where the dishwasher will be used.

NOTE: Remove and save the washer, screen, and screen holder or aerator for future use.

A

BElectrical Shock HazardDo not remove ground prong.Do not use an extension cord.Connecting the Faucet AdapterPreparing the faucet

C Connecting the faucet adapter to faucets with external threadsConnecting the faucet adapter to faucets with internal threads

A.Washer

B.Screen

C.Screen holder or aerator

Connecting the faucet adapter to faucets with external threads

Insert the 2 screens and then the thin washer from the faucet adapter kit into the faucet adapter. Attach the adapter onto the end of the faucet.

NOTE: Do not use the thick washer.

AConnecting to Water and Electrical SupplyA

B Manual backgroundManual backgroundManual backgroundManual backgroundManual background

CManual backgroundManual background

A.Thin washer

B.Screens

C.Faucet adapter

Connecting the faucet adapter to faucets with internal threads

Insert the 2 screens, the thin washer, and then the thick washer from the faucet adapter kit into the faucet adapter. Attach the adapter onto the end of the faucet.

NOTE: Use both washers.

AManual background

B Manual backgroundManual background C Manual backgroundManual background

D

A. Thick washer

B. Thin washer

C.Screens

D.Faucet adapter

Connecting to Water and Electrical Supply

1.Run water at the faucet until it is hot. Turn off the water.

2.Pull the hoses out of their storage compartment on the back of the dishwasher.

NOTE: Make sure the hoses are not kinked or twisted. Kinked hoses reduce washing performance.

3.Pull down on the locking collar while lifting the hose connector onto the faucet adapter.

A Manual backgroundManual backgroundManual backgroundManual background

B

C

A.Faucet adapter

B.Locking collar

C.Hose connector

5

Page 6
Image 6
Whirlpool W10275146A Connecting the Dishwasher, Portable Dishwashers DP1040 model only, Connecting the Faucet Adapter