Whirlpool W10325493A Gas Conversions, LP Gas Conversion, To Convert Gas Pressure Regulator, B A C

GAS CONVERSIONS

WARNING

Explosion Hazard

Use a new CSA International approved gas supply line.

Install a shut-off valve.

Securely tighten all gas connections.

If connected to LP, have a qualified person make sure gas pressure does not exceed 14" (36 cm) water column.

Examples of a qualified person include:

licensed heating personnel,

authorized gas company personnel, and authorized service personnel.

Failure to do so can result in death, explosion, or fire.

Gas conversions from Natural gas to LP gas or from LP gas to Natural gas must be done by a qualified installer.

LP Gas Conversion

WARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Connect anti-tip bracket to rear range foot.

Reconnect the anti-tip bracket, if the range is moved.

Failure to follow these instructions can result in death or serious burns to children and adults.

To Convert Gas Pressure Regulator

1.Turn manual shutoff valve to the “closed” position

B

A

C

A. To range

B. Manual shutoff valve “closed” position

C. Gas supply line

2.Remove grates.

3.Lift the cooktop by both front corners until the side support rods snap into position.

4.Locate the gas pressure regulator.

A

A. Gas pressure regulator

IMPORTANT: Do not remove the gas pressure regulator.

5.With a flat-blade screwdriver, remove the brass cap and flip the brass cap over so that “LP” is visible.

NAT

A

A. Brass cap

6.Reinstall the cap and tighten with the flat-blade screwdriver.

LP

A

A. Cap

11