INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Tools needed

Tape measure

Marker or pencil

¼" (6.35 mm) nut driver

Pliers

Flat-blade screwdriver

Parts supplied

Foam strip roll

2½" (6.4 cm) clamping

Clamping brackets (2)

screws (2)

 

Parts needed

A UL listed or CSA approved connector for ½" (1.3 cm) diameter conduit

UL listed wire connectors

Check local codes. Check existing electrical supply. See the “Electrical Requirements” section.

It is recommended that all electrical connections be made by a licensed, qualified electrical installer.

Location Requirements

IMPORTANT: Observe all governing codes and ordinances. When installing cooktop, use minimum dimensions given.

To eliminate the risk of burns or fire by reaching over the heated surface units, cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a range hood that projects horizontally a minimum of 5" (12.7 cm) beyond the bottom of the cabinets.

The cooktop must be a specified cooktop that is approved to be installed either alone or over an undercounter built-in oven. Check the cooktop base for an approved installation label. If you do not find this label, contact your dealer to confirm that your cooktop is approved.

The cooktop must be installed in a level countertop.

Ovens approved for this type of installation will have an approval label located on the top of the oven. If you do not find this label, contact your dealer to confirm that your oven is approved. Refer to oven manufacturer’s Installation Instructions for approval for built-in undercounter use and proper cutout dimensions.

The cooktop should be installed away from strong draft areas, such as windows, doors, fans or strong heating vents. The cooktop should be located for convenient use in the kitchen.

Use the countertop opening dimensions that are given with these Installation Instructions. Given dimensions are minimum clearances and provide 0" (0 cm) clearance.

Grounded electrical supply is required. See “Electrical Requirements” section.

IMPORTANT: To avoid damage, check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate or sustain other damage.

Product Dimensions

 

B

 

A

 

C

 

D

F

E

 

A. Glass depth - black and white models - 21³⁄₄" (55.2 cm) Glass depth - stainless steel models - 22¹⁄₈" (56.4 cm)

B. Glass width - 30" (76.2 cm) models - 30¹³⁄₁₆" (78.4 cm) Glass width - 36" (91.4 cm) models - 36⁵⁄₁₆" (92.3 cm)

C. Frame depth - 20¹⁄₄" (51.5 cm)

D. Frame width - 30" (76.2 cm) models - 28¹⁵⁄₁₆" (73.5 cm) Frame width - 36" (91.4 cm) models - 34⁷⁄₁₆" (87.5 cm)

E. Cooktop height - 3³⁄₄" (9.6 cm)

F. Cooktop height including conduit (located at rear of cooktop, right side) - 5¹⁄₄" (13.5 cm)

2

Page 2
Image 2
Whirlpool W10353374A installation instructions Installation Requirements, Tools and Parts, Location Requirements

W10353374A specifications

The Whirlpool W10353374A is a high-performance dishwasher that combines functionality, efficiency, and modern design. This appliance is tailored for individuals and families seeking a reliable way to maintain clean dishes with minimal effort. With its advanced features and smart technologies, the W10353374A makes dishwashing a seamless task.

One of the standout features of the Whirlpool W10353374A is its SpaceSaver design. This dishwasher offers a customizable loading experience, optimizing space for varying dish sizes. Thanks to its adjustable upper rack and fold-down tines, users can easily accommodate larger pots, pans, and dishes, ensuring a thorough clean without the need for tedious handwashing.

The W10353374A employs the powerful sensing technology known as WashSense. This system automatically detects soil levels in the dishes and adjusts cycle lengths and selections accordingly. It ensures energy-efficient operations while consistently delivering sparkling-clean results. Additionally, the appliance features multiple wash cycle options, including options for normal, heavy, and quick wash, allowing users to choose the perfect setting based on the load's needs.

Noise levels are another concern when it comes to dishwashing. The Whirlpool W10353374A addresses this with its Quiet Wash design, which operates at a mere sound level of 47 dBA. This means that users can enjoy a peaceful kitchen environment even while the dishwasher is in full operation.

Efficiency is further highlighted through the Energy Star certification, indicating that the W10353374A consumes less water and energy compared to standard models. This not only benefits the environment but also helps users save on utility bills. The dishwasher comes equipped with a Soil Sensor, which plays a crucial role in ensuring effective cleaning by using just the right amount of water based on the level of dirt on the dishes.

Lastly, the stainless steel interior adds durability and presents a sleek look that suits various kitchen styles. The whirlpool W10353374A is designed with user-friendly controls, making it simple for anyone to select the desired wash cycle efficiently.

In conclusion, the Whirlpool W10353374A is an exceptional dishwasher that embodies practicality and innovation. With its SpaceSaver design, WashSense technology, and Energy Star certification, it provides an effective dishwashing solution for modern households.