Mobile Home - Additional Installation Requirements

The installation of this range must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD Part 280). When such standard is not applicable, the Standard for Manufactured Home Installations, ANSI A225.1/NFPA 501A or with local codes.

Mobile home installations require:

■When this range is installed in a mobile home, it must be secured to the floor during transit. Any method of securing the range is adequate as long as it conforms to the standards listed above.

■Four-wire cable must be used in a mobile home installation. The appliance wiring will need to be revised. See “Electrical Connection” section.

Product Dimensions

A

C

F

B*

Cabinet Dimensions

Cabinet opening dimensions shown are for 25" (64 cm) countertop depth, 24" (61 cm) base cabinet depth and 36" (91.4 cm) countertop height.

IMPORTANT: If installing a range hood or microwave hood combination above the range, follow the range hood or microwave hood combination installation instructions for dimensional clearances above the cooktop surface.

A

C

 

B

 

D

E

H

J**

F

G

I

 

 

 

 

 

 

 

 

 

 

D

 

 

 

 

 

 

 

 

 

 

 

E**

 

 

 

 

A. 30³⁄₄" (78 cm)

 

 

D. 29⁷⁄₈" (75.9 cm)

 

 

A. 13" (33 cm) upper cabinet depth B. 30" (76.2 cm) min. opening width

C. For minimum clearance to the top of the cooktop, see NOTE*.

D. 23¹⁄₄" (58.1 cm) opening depth

E.30" (76.2 cm) min. opening width

F.Junction box - 5.5" (14 cm) min. from either cabinet, 8¹⁄₄" (21 cm) max. from floor

G. Cabinet door or hinge should not extend into cutout.

H. 27¹⁄₂" (69.9 cm) top of countertop to support slats

I. 6" (15.2 cm) wide support slat on each side of cutout

J. (Optional) - ³⁄₈" (1.0 cm) plywood support (30"

[76.2 cm] width x 4"

[10.2 cm] height), securely attached to at least 2 wall studs, in place of sheetrock**

B. 27¹⁄₂" (69.9 cm) height to underside

E. 28⁵⁄₁₆" (71.9 cm) from

of cooktop edge with leveling legs

handle to standoff at back

screwed all the way in*

of range**

C. Model/serial number plate

F. 23³⁄₄" (60.3 cm)

(located below the electronic

countertop notch to rear

control on oven frame)

of cooktop

*Range can be raised approximately 1" (2.5 cm) by adjusting the leveling legs.

**When installed in a 24" (61 cm) base cabinet with 25" (63.5 cm) countertop; front of oven door protrudes 2¹⁄₂" (6.4 cm) beyond 24" (61 cm) base cabinet.

*NOTE: 24" (61 cm) minimum when bottom of wood or metal cabinet is covered by not less than ¹⁄₄" (0.64 cm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.

30" (76.2 cm) minimum clearance between the top of the cooking platform and the bottom of an uncovered wood or metal cabinet.

**The plywood support (J) is required only when the wall mounting option is chosen for installation of the anti-tip bracket. For more information, see the “Install Anti-Tip Bracket” section.

3

Page 2 Page 4
Page 3
Image 3
Whirlpool W10430948A Mobile Home Additional Installation Requirements, Product Dimensions Cabinet Dimensions
Page 2 Page 4

W10430948A specifications

The Whirlpool W10430948A is a versatile and innovative refrigerator water filter designed to optimize the quality of drinking water and ice produced by compatible Whirlpool refrigerators. Its primary function is to reduce harmful contaminants, ensuring that every sip and scoop is clean and refreshing.

One of the standout features of the W10430948A is its advanced filtration technology. The filter comprises a carbon block, which effectively reduces chlorine taste and odor, along with a variety of other impurities such as lead, mercury, and cadmium. This technology not only improves the taste of water and ice but also promotes a healthier lifestyle by providing access to cleaner drinking water.

Installation of the W10430948A is user-friendly, thanks to its easy twist-and-lock design. This allows homeowners to quickly replace the filter without requiring any special tools or technical expertise. The filter’s compatible models ensure it fits seamlessly into numerous Whirlpool refrigerator models, reinforcing its status as a practical and efficient choice for many households.

The longevity of the W10430948A filter is another essential characteristic. Typically, this filter can last up to six months under normal use conditions, which helps reduce maintenance efforts and costs over time. The filter also features an easy-to-read indicator that alerts users when it’s time for a replacement, ensuring optimal performance and uninterrupted access to clean water.

In addition to its primary function, the W10430948A filter exemplifies Whirlpool's commitment to environmental sustainability. By using this filter, households can reduce reliance on bottled water, thereby minimizing plastic waste and contributing to eco-friendly practices. As more consumers seek environmentally conscious choices, products like the W10430948A align with this growing trend.

Ultimately, the Whirlpool W10430948A offers a perfect blend of advanced filtration technology, user convenience, and environmental responsibility. This filter not only enhances the overall quality of water and ice but also underscores Whirlpool's dedication to providing innovative solutions for healthier living spaces. Whether you’re hydrating, cooking, or entertaining, the W10430948A ensures that every drop counts, reinforcing the importance of clean water in daily life.
Top Page Image Contents