Verify Anti-Tip Bracket Is Installed Engaged

1.Connect the 2 black wires (C) together using a UL listed wire connector.

2.Connect the 2 white wires (D) and the green (or bare) ground wire (of the range cable) using a UL listed wire connector.

3.Connect the 2 red wires (G) together using a UL listed wire connector.

4.Install junction box cover.

Verify Anti-Tip Bracket Is Installed and

Engaged

1.Verify that the anti-tip bracket is installed and engaged by completing the following steps.

2.If the lower trim is already installed, remove the 2 screws from the lower trim and set the trim aside. See the illustration in the “Install Lower Trim” section.

3.Use a flashlight to look underneath the bottom of the range.

4.Visually check that the rear range foot is inserted into the slot of the anti-tip bracket.

Level Range

1.Place rack in oven. Place level on rack and check levelness of range, first side to side; then front to back.

2.If range is not level, using two or more people remove range from cutout onto cardboard or hardboard.

3.Use wrench to adjust leveling legs up or down until range is level. Using 2 or more people, lift range back into cutout.

4.Check that rear leveling leg is engaged in anti-tip bracket.

NOTE: Range must be level for satisfactory baking conditions.

Install Lower Trim

A.Screws

B.Lower trim piece

Complete Installation

1.Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped.

2.Check that you have all of your tools.

3.Dispose of/recycle all packaging materials.

4.Check that the range is level. See the “Level Range” section.

5.Use a mild solution of liquid household cleaner and warm water to remove waxy residue caused by shipping material. Dry thoroughly with a soft cloth. For more information, read the “Range Care” section of the Use and Care Guide.

6.Read the “Range Use” section in the range Use and Care Guide.

7.Slide range into its final location. Check that the flexible conduit is not bent.

8.Turn power on. Turn on surface cooking elements and oven. See the Use and Care Guide for specific instruction on range operation.

If range does not operate, check the following:

■Household fuse is intact and tight; or circuit breaker has not tripped.

■Electrical supply is connected.

■See the “Troubleshooting” section in the Use and Care Guide.

When the range has been on for 5 minutes, check for heat. If range is cold, turn off the range and contact a qualified technician.

W10430948A specifications

The Whirlpool W10430948A is a versatile and innovative refrigerator water filter designed to optimize the quality of drinking water and ice produced by compatible Whirlpool refrigerators. Its primary function is to reduce harmful contaminants, ensuring that every sip and scoop is clean and refreshing.

One of the standout features of the W10430948A is its advanced filtration technology. The filter comprises a carbon block, which effectively reduces chlorine taste and odor, along with a variety of other impurities such as lead, mercury, and cadmium. This technology not only improves the taste of water and ice but also promotes a healthier lifestyle by providing access to cleaner drinking water.

Installation of the W10430948A is user-friendly, thanks to its easy twist-and-lock design. This allows homeowners to quickly replace the filter without requiring any special tools or technical expertise. The filter’s compatible models ensure it fits seamlessly into numerous Whirlpool refrigerator models, reinforcing its status as a practical and efficient choice for many households.

The longevity of the W10430948A filter is another essential characteristic. Typically, this filter can last up to six months under normal use conditions, which helps reduce maintenance efforts and costs over time. The filter also features an easy-to-read indicator that alerts users when it’s time for a replacement, ensuring optimal performance and uninterrupted access to clean water.

In addition to its primary function, the W10430948A filter exemplifies Whirlpool's commitment to environmental sustainability. By using this filter, households can reduce reliance on bottled water, thereby minimizing plastic waste and contributing to eco-friendly practices. As more consumers seek environmentally conscious choices, products like the W10430948A align with this growing trend.

Ultimately, the Whirlpool W10430948A offers a perfect blend of advanced filtration technology, user convenience, and environmental responsibility. This filter not only enhances the overall quality of water and ice but also underscores Whirlpool's dedication to providing innovative solutions for healthier living spaces. Whether you’re hydrating, cooking, or entertaining, the W10430948A ensures that every drop counts, reinforcing the importance of clean water in daily life.

Whirlpool W10430948A Verify Anti-Tip Bracket Is Installed Engaged, Level Range

Models: W10430948A