Whirlpool W10430948A installation instructions Moving the Range

Models: W10430948A

1 8
Download 8 pages 12.11 Kb
Page 8
Image 8

Moving the Range

WARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Install anti-tip bracket to floor or wall per installation instructions.

Slide range back so rear range foot is engaged in the slot of the anti-tip bracket.

Re-engage anti-tip bracket if range is moved.

Do not operate range without anti-tip bracket installed and engaged.

Failure to follow these instructions can result in death or serious burns to children and adults.

When moving range, use 2 or more people to lift range onto cardboard or hardboard to avoid damaging the floor covering.

If removing the range is necessary for cleaning or maintenance:

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

1.Disconnect power.

2.Disconnect wiring.

3.Slide range forward to complete cleaning or maintenance.

4.Check that the anti-tip bracket is installed and engaged. See the “Verify Anti-Tip Bracket Is Installed and Engaged” section.

5.Check that range is level. See the “Level Range” section.

6.Reinstall the lower trim. See the “Install Lower Trim” section.

7.Reconnect wiring.

8.Reconnect power.

W10430948A

© 2012. Whirlpool Corporation.

3/12

All rights reserved.

Printed in U.S.A.

Page 8
Image 8
Whirlpool W10430948A installation instructions Moving the Range