Whirlpool WHELJ1 How a Central Water Filtration System Works, Normal Operation, Clean Rinse Cycle

Models: WHELJ1

1 27
Download 27 pages 18.31 Kb
Page 6
Image 6
How a Central Water Filtration System Works

How a Central Water Filtration System Works

NORMAL OPERATION

During normal operation water enters the Central Water Filtration System and flows through several fil- tration processes where tastes, odors and sediment* are reduced.

CLEAN RINSE CYCLE

A Clean Rinse cycle will automatically be initiated based on how the controller has been programmed. The Clean Rinse cycle lifts and expands the media bed to rejuvenate the media and then repacks the bed for continued use. During the Clean Rinse cycle, dirt, sediment, iron, etc. are flushed from the Central Water Filtration System down the drain.

APPLICATIONS FOR A CENTRAL WATER FILTRATION SYSTEM

￿Do not use the Central Water Filtration System with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

￿The Central Water Filtration System may not be an effective treatment method for water sources with a hydrogen sulfide problem (rotten egg odor or taste) If your water has hydrogen sulfide, contact a water treatment expert or call 1-866-986-3223.

￿The Central Water Filtration System will not remove iron and is not intended to replace iron treatment equipment.

￿Although the Central Water Filtration System has sediment* filter capabilities, additional sediment fil- tration may be needed in problem water applica- tions.

*As shown by independent third party test data.

6

Page 6
Image 6
Whirlpool WHELJ1 manual How a Central Water Filtration System Works, Normal Operation, Clean Rinse Cycle