Programming the Central Water Filtration System
Display
UP button
DOWN button
CLEAN button
If you have questions about installation, program-
ming, operating and routine maintenance...
call 1-866-986-3223, Monday - Friday, 8 am to 9 pm, EST.
When the transformer is plugged into the electrical outlet, a model code and a test number (example: J1.3), begin to flash in the faceplate display. Then, 12:00 PM and the words “PRESENT TIME" begin to flash.
NOTE: If “- - -
DOWN button until “CF 8” shows in the dis- play. Then, press the PROGRAM button to set, and change to the flashing “PRESENT TIME" dis- play.
SET TIME OF DAY
If the words “PRESENT TIME" do not show in the display, press the PROGRAM button until they do.
1.Press the UP or DOWN buttons to set the pres- ent time. Up moves the display ahead; down sets the time back. Be sure AM or PM is correct.
NOTE: Press buttons and quickly release to slowly advance the display. Hold the buttons down for fast advance.
2.Press the PROGRAM button a few times, until the time appears on the display, but is not flashing.
PROGRAM |
|
button | FIG. 12 |
FIG. 13
FIG. 14
14