Settings
Fahrenheit and Celsius
The temperature is factory preset to Fahrenheit but can be changed to Celsius.
1.Press SETTINGS twice. “TEMP UNIT” and “FAHRENHEIT. Press (1) for CELSIUS” will appear in the display text area.
2.Press the Temp/Time “1” keypad to change the temperature unit.
3.“CELSIUS Selected” will scroll in the text area. The temperature unit has been changed.
NOTE: A similar procedure can be done to return the temperature unit to Fahrenheit.
Tones
Tones are audible signals, indicating the following:
Basic Functions
One tone
■Valid pad press
■Function has been entered
■Oven is preheated
Three tones
■Invalid pad press
Four tones
■End of cycle
■End of Kitchen Timer
Adjusting Sound On or Off
The oven sound is factory preset for On but can be changed to Off.
1.Press SETTINGS three times. “SOUND” and “ON. Press
(1) for OFF” will appear in the display text area.
2.Press the Temp/Time “1” keypad to change the sound setting.
3.“OFF Selected” will scroll in the text area. The sound setting has been changed.
NOTE: A similar procedure can be done to return the sound setting to On.
Adjusting Sound Volume
The oven sound is factory preset for High but can be changed to Low.
1.Press SETTINGS four times. “SOUND VOLUME” and “HIGH. Press (1) for LOW” will appear in the display text area.
2.Press the Temp/Time “1” keypad to change the sound volume setting.
3.“LOW Selected” will scroll in the text area. The sound volume setting has been changed.
NOTE: A similar procedure can be done to return the sound volume setting to High.
Adjusting End Tone On or Off
The end tone is factory preset for On but can be changed to Off.
1.Press SETTINGS five times. “END TONE” and “ON. Press
(1) to OFF” will appear in the display text area.
2.Press the Temp/Time “1” pad to change the end tone setting.
3.“OFF Selected” will scroll in the text area. The end tone setting has been changed.
NOTE: A similar procedure can be done to return the end tone setting to On.
Adjusting Keypress Tone On or Off
The keypress tone is factory set for On but can be changed to Off.
1.Press SETTINGS six times. “KEYPRESS TONE” and “ON. Press (1) to OFF” will appear in the display text area.
2.Press the Temp/Time “1” pad to change the keypress tone setting.
3.“OFF Selected” will scroll in the text area. The keypress tone setting has been changed.
NOTE: A similar procedure can be done to return the keypress tone setting to ON.
Adjusting Reminder Tone On or Off
The reminder tone is factory preset for On but can be changed to Off.
1.Press SETTINGS seven times. “REMINDER TONE” and “ON. Press (1) to OFF” will appear in the display text area.
2.Press the Temp/Time “1” pad to change the reminder tone setting.
3.“OFF Selected” will scroll in the text area. The reminder tone setting has been changed.
NOTE: A similar procedure can be done to return the reminder tone setting to ON.
Clock
To Set the Clock:
Before setting, make sure the oven(s) and Timer are off.
1.Press SETTINGS once, and “CLOCK” appears in the text area.
2.Press the Temp/Time keypad to enter the desired time. The text area will change to “Press START.”
3.Press START. “Time Set” will appear in the text area. Once the display clears, the time is set.
The clock can be set to display time in a
To Change the Clock to 24-Hour Format:
1.Press SETTINGS eight times. “12/24 HOUR” and “12HR. Press (1) for 24HR” will appear in the display text area.
2.Press the Temp/Time “1” keypad to change the 12/24 hour setting.
3.“24HR Selected” will scroll in the text area. The 12/24 hour setting has been changed.
NOTE: A similar procedure can be done to return the 12/24 hour setting to 12HR.
Sabbath Mode
Sabbath Mode is used to configure the oven system so that certain features and modes are disabled or defeatured. By enabling Sabbath Mode, you will make the oven conform to
The oven is factory preset with Sabbath Mode Off.
To Enable Sabbath mode:
1.Press SETTINGS nine times. “SABBATH” and “OFF. Press
(1) for ON” will appear in the display text area.
2.Press the Temp/Time “1” pad to change the Sabbath setting.
3.“ON Selected” will scroll in the text area. The Sabbath setting has been changed.
NOTE: A similar procedure can be done to return the Sabbath setting to OFF.
6
