Using Your Dishwasher
Silverware | basket |
| Spray | tower | ||
|
|
|
|
| protector | |
Bottom | rack | Filter system | screen | |||
|
|
| ||||
|
|
| II/ | (not shown) | ||
Water inlet | opening | Lower | spray arm | |||
Heating | elemen | |||||
|
|
|
| Overfill | protector | |
|
|
| tergent | dispenser | ||
|
|
| - | Access | panel | |
|
|
| color | panel | ||
|
| \ |
| Model | and | serial |
|
|
| number | label | ||
|
| Rinse | agent dispenser | (on right | side) |
Before starting dishwasher
1. Read “Important Safety Instructions” on page 2 before starting your dishwasher.
2.Properly load the top and bottom racks, and silverware basket. (See page 4.)
3.Spin the lower spray arm to make sure nothing will stop it from turning freely.
4.Add detergent. See page 5.
5.Check rinse agent dispenser. See page 5.
6.Push door firmly when closing and it will automatically latch.
7.Run hot water at sink nearest dishwasher until it is hot. Turn it off.
Starting dishwasher
1.Select a drying option.
2.Turn the Cycle Control Knob clockwise to point to WASH. The dishwasher will automatically start the cycle.
Cycle and options
Wash cycle
A double wash for moderate to heavily soiled loads
Select the mark next to WASH with the Cycle Control Knob. The cycle sequence will be:
Wash p Rmse b Rinse bWash b Rinse b Rinse p&me ~Dry Hoff
Option selector button
Dry Select options
If the HEATED DRYING Option Selector Button is pushed, air m the dishwasher IS heated during the “dry” part of the cycle.
For best drying results, use a liquid rinse agent.
Cycle control knob
If the ENERGY SAVER Option Selector Button is pushed, air in the dishwasher is not heated. Using this option helps save energy, but dishes take longer to dry (overnight) and some water spottmg may result. Some items (such as plastics) may need towel drying.
For best drying results, use a liquid rinse agent.
Page 3