Whirlpool WU3000V, WU4406V, WU3006V, WU4400V Cycles and options Models WU565OVand WU685OV

Cycles and options (Models WU565OVand WU685OV)

Pots & Pans cycle

This cycle supplies maximum cleaning for cooked-on or baked-on foods. A timer delays the cycle while the dishwasher automatically heats the water to 145°F (65°C) in both washes and the last rinse (marked l ). Cycle time depends on time needed to heat water.

Push the POTS & PANS Cycle Selector Button and select the mark next to POTS

&PANS with the Cycle Control Knob. The cycle sequence wiIl be:

Wash*+Rinse+Wash*+Rinse-Rinse*~+Dry -Off

Heavy Wash cycle

A double wash for heavily soiled loads. A timer delays the cycle while the dishwasher automatically heats the water to 145°F (65°C) in the main wash and the last rinse (marked *). Cycle time depends on time needed to heat water.

Push the NORMAL/HEAVY WASH Cycle Selector Button and HI-TEMP WASHING Option Selector Button. Select the mark next to HEAVY WASH with the Cycle Control Knob. The cycle sequence will be:

Wash-Rinse-Wash* FRinse-Rinse*-Dry -Off

Normal Wash cycle

A double wash for normal, everyday loads. (The Energy Guide Label data is based on this cycle.)

Push the NORMAL/HEAVY WASH Cycle Selector Button and select the mark next to NORMAL WASH with the Cycle Control Knob. The cycle sequence will be:

Wash-Rinse-Wash-Rinse +Rinse +Dry -Off

Light Wash cycle

For pre-rinsed or lightly soiled loads. Push the LIGHT WASH Cycle Selector

Button and select the mark next to LIGHT WASH with the Cycle Control Knob. The cycle sequence will be:

Rinse-Wash-Rinse-Rinse-Dry-Off

Energy Saver Wash cycle

For pre-rinsed or lightly soiled loads. This cycle uses less heated water than other wash cycles.

Push the ENERGY SAVER WASH Cycle Selector Button and select the mark next to ENERGY SAVER WASH with the Cycle Control Knob. The cycle sequence will be:

Wash bRinsem+Rinse-Dry-Off

China Crystal cycle (Model WU685OV only)

A light wash and gentle dry for china and crystal. The heating element cycles on and off during the “dry” part of the cycle (unless the Energy Saver Dry option is selected).

Push the CHINA CRYSTAL Cycle Selector Button and select the mark next to CHINA CRYSTAL with the Cycle Control Knob. The cycle sequence will be:

Wash-Rinse-RinsejDry+Off

Rinse & Hold cycle

For rinsing a few items to be washed one or more days later.

Select the mark next to RINSE & HOLD with the Cycle Control Knob and, for Model WU685OV only, push the RINSE

&HOLD Cycle Selector Button. Push the ENERGY SAVER DRY Option Selector Button. Using the Heat Dry option may cause food to bake on dishes. The cycle sequence will be:

Rinse+Rinsem+Off

Energy Saver Dry option

Air in the dishwasher is automatically heated during the “dry” part of all cycles.

If the ENERGY SAVER DRY Option Selector Button is pushed, air in the dishwasher is not heated. Using this option helps save energy, but dishes take longer to dry (overnight) and some water spotting may result. Some items (such as plastics) may need towel drying.

For best results, use a liquid rinse aid.

Hi-Temp Washing option

When the HI-TEMP WASHING Option Selector Button is pushed, water for the main wash and the final rinse is heated to 145°F (63°C). If the water is already hot enough, the cycle continues without delay. For model WU685OV, the WATER HEATING HOLD signal light wiIl be on while the cycle delays for water heating.

The Hi-Temp Washing option is automatic in POTS & PANS cycle.

Using DELAY HOURS

1.Push desired Cycle Selector Button.

2.Push desired Option Selector Buttons.

3.Turn Cycle Control Knob clockwise to the number of hours you want the dishwasher to delay before the selected cycle starts.

4.Close and latch the door. For model WU685OV, the DELAY WASH signal light will come on and stay on until the cycle starts.

NOTE:

. You can add items while time is counting down. Close and latch the door. The timer will not advance if the door is unlatched.

. Rinse & Hold and Low Energy Wash cycles can’t be delayed.

The CLEAN signal light

The CLEAN signal light will come on when a washing cycle is complete.

To turn light off, turn the Cycle Control Knob clockwise slightly until the light