Using Your Microwave Oven

Using 2-4 Plates

When heating food with a cook time that you set, you can heat two 10 14 in. (26.7 cm) plates side by side or one dish larger

than the turntable, plus two plates on the cooking

rack. For best results, halfway through cooking

turn the plates halfway around. Do the same when heating a larger (9 to 13 in. [23-33 cm])

casserole. When heating 4 dinner plates, switch the plates between top and bottom when you turn them.

To heat 2 bottom plates together or one larger dish, the turntable should not be turning.

You can shut the turntable off by touching TURNTABLE ON/OFF.

“TURNTABLE OFF” appears on the display. PRESS to enter setting.

1.TOUCH FIRST SCREEN pad, TURN to 2-4 Plates and PRESS.

2.TURN to select number of plates and PRESS.

3.Arrange plates as shown on left. PRESS to Start.

NOTE: You cannot choose Turntable Off during auto cook functions.

Using the Exhaust Fan

1.Turn on the fan and choose fan speed from 0% to 100%.

TOUCH FAN ON/OFF

FAN

ON / OFF

To increase fan speed, TOUCH the Upper arrow. To decrease fan speed, TOUCH the Lower arrow.

The display screen will show "FAN" and the percentage of the fan speed.

NOTE: If temperature from the range or cooktop below the oven gets too hot, the exhaust fan in the vent hood will automatically turn on at the "100%" setting to protect the oven. It may stay on up to an hour to cool the oven. When this occurs, the FAN ON/OFF pad will not turn off the fan.

NOTES:

Two seconds after the last time you touch FAN ON/OFF, the screen returns to the previous display.

The first time you turn on the fan after connecting the microwave oven to power, the fan will start at speed two. The next time the fan is turned on, it will start at the last speed used.

2.Turn off fan when desired.

TOUCH FAN ON/OFF

20

Page 20
Image 20
Whirlpool YKHMS147H installation instructions Using 2-4 Plates, Using the Exhaust Fan