I
Cover the spool with the “NET” as chemical fibers (fibres) and the like are easily frayed.
When using a real type thread spool, insert the spool adapter (supplied with the machine) (as shown).
2-4. Replacing Needles
Replace needles in the following way:
Note: be sure to take out the power supply plug before replacing needles.
(1)Bring needles to their highest position by turning handwheel towards you.
(2)Loosen the needle clamp screw and remove the two needles together.
(3)With the flat side away from you, Insert the new two needles together nto the groove of needle bar as far as it will go.
Use “HA x iSP (705/130)” #11(80) or 414(90) or ones the same as for
