Remove hand knobs from handle mounting, Catcher

3	A
	A
Setup and
Adjustment

1.	Remove grass catcher and any packing material
	which may be between upper and lower handles.
	a. Remove hand knobs from handle mounting
	brackets and pull up and back on upper handle
	as shown in Figure 3-1. Make certain the lower
	handle is seated securely into the handle mounting
	brackets.
	b. Tighten hand knobs to secure upper handle to
	lower handle. Make sure that each carriage bolt is
	seated properly in the handle.
2.	Replace and tighten hand knobs removed earlier to
	secure lower handle to handle brackets, Figure 3-2.

Stand behind the mower as if you were going to operate it. Your right hand corresponds to the right side of the mower; your left hand corresponds to the left side of the mower.

To assemble the grass catcher (if needed), place bag over frame with the black plastic side at the bottom. Slip plastic channel over hooks on frame. All channels except for center top of bag attach from the outside. The center of bag attaches from the inside.

IMPORTANT DO NOT crimp the cables when lifting the handle up.

IMPORTANT This unit is shipped without gasoline or oil in the engine. Fill up gasoline and oil as instructed in the accom- panying engine manual BEFORE operating your mower.

Handle Mounting Bracket

Figure 3-1: Lift handle and tighten hardware.

Figure 3-2: Secure handle to handle mounting brackets.

Figure 3-3: Pull recoil starter through rope guide and tighten.

3.	The rope guide is attached to the right side of the
	upper handle. Loosen the wing nut which secures the
	rope guide, Figure 3-3.
	a.	Hold the blade control against upper handle.
	b. Pull starter rope out of the engine. Release the
		blade control.
	c.	Slip starter rope into rope guide.
	d.	Tighten wing nut.
4.	Attach cables to the lower handle with the cable ties
	already on the lower handle. Insert pegs on cable ties
	into the holes on lower handle. Pull cable ties tight and
	cut off the excess.
5.	Before attaching the grass catcher, the mulching
	baffle must be removed, Figure 3-5.
	a.	Lift rear discharge door.
	b.	Remove mulching baffle.
6.	Follow steps below to install the grass catcher, Figure
	3-4.
	a.	Lift rear discharge door.
	b. Place grass catcher on the pivot rod. Let go
		of discharge door so that it rests on the grass
		catcher.

Figure 3-4: Lift discharge door and place grass catcher on rod.

83M specifications

The White Outdoor 83M is a noteworthy entry in the world of outdoor power equipment, particularly known for its reliability and versatility. This walk-behind mower is designed primarily for homeowners looking for a robust machine that can handle a variety of lawn care tasks with ease.

A standout feature of the White Outdoor 83M is its powerful engine. Equipped with a reliable Briggs & Stratton engine, it offers dependable performance and starts effortlessly, making mowing a hassle-free experience. The engine generates ample power to tackle thick grass and uneven terrain, ensuring that users can maintain their lawns efficiently.

The cutting deck of the White Outdoor 83M is another highpoint. It typically features a 21-inch steel deck that provides a wide cutting path, allowing users to cover more ground in less time. The adjustable cutting height settings are easily accessible, enabling operators to customize the cut from low to high, accommodating different grass types and personal preferences.

One of the more advanced technologies found in the White Outdoor 83M is its mulching capability. This feature allows the mower to finely chop clippings and distribute them back onto the lawn, providing natural fertilization and reducing yard waste. Additionally, it often comes equipped with side discharge and rear bagging options, so users can choose the best method for their lawn maintenance needs.

The ergonomics of the White Outdoor 83M are designed for user comfort and convenience. Its adjustable handlebars ensure a comfortable grip for operators of varying heights, while its lightweight design and easy maneuverability make navigating around obstacles a breeze. The rear-wheel drive system enhances traction and control, even on sloped or uneven lawns.

Another characteristic worth noting is the mower's durable construction. Built with high-quality materials, the White Outdoor 83M is designed to withstand the rigors of outdoor use over time.

In summary, the White Outdoor 83M combines a powerful engine, versatile cutting options, and user-friendly features that make it a solid choice for homeowners seeking a dependable lawn mower. Its blend of technology and design not only enhances productivity but also simplifies the mowing process, making lawn care a more enjoyable endeavor.

White Outdoor 83M Remove hand knobs from handle mounting, Brackets, Seated properly in the handle

Models: 83M

Setup and

Adjustment

a. Remove hand knobs from handle mounting

brackets.

seated properly in the handle.

Figure 3-1: Lift handle and tighten hardware.

Figure 3-2: Secure handle to handle mounting brackets.

Figure 3-3: Pull recoil starter through rope guide and tighten.

The rope guide is attached to the right side of the

upper handle. Loosen the wing nut which secures the

rope guide, Figure 3-3.

blade control.

Slip starter rope into rope guide.

Tighten wing nut.

cut off the excess.

baffle must be removed, Figure 3-5.

Lift rear discharge door.

Remove mulching baffle.

catcher.

Figure 3-4: Lift discharge door and place grass catcher on rod.

83M specifications