White Outdoor Z - 180, Z - 180L, Z - 200 Lubrication, Check, Change, Capacity, Type, Grease Point

SECTION 7: LUBRICATION

Use the two tables that follow for lubrication details. The first table is for Oil details and the second table is for grease point information.

Oil	Check		Change		Capacity	Type
Engine crankcase	See Engine Operator’s Manual Section
Hydraulic units	50 Hours		500 Hours		9.5 Quarts	Part Number 737-0305 (10W40 motor oil)
Grease Point		When to Grease		Type of Grease
Caster wheels - 3 fittings (1 on each		50 Hours		Two strokes (minimum) of lubricator using 251 H EP grease or
wheel and one on middle of caster				equivalent No. 2 multi-purpose lithium grease (refer to			GREASE
assembly)				POINT LOCATIONS on page 23 for locations)
Control Tower - 2 fittings		50 Hours		Two strokes (minimum) of lubricator using 251 H EP grease or
(Right side of tower)				equivalent No. 2 multi-purpose lithium grease (refer to			GREASE
				POINT LOCATIONS on page 23 for locations)
Lift Arms		50 Hours		Two strokes (minimum) of lubricator using 251 H EP grease or
				equivalent No. 2 multi-purpose lithium grease (refer to			GREASE
				POINT LOCATIONS on page 23 for locations)
Lift Handle		50 Hours		Two strokes (minimum) of lubricator using 251 H EP grease or
				equivalent No. 2 multi-purpose lithium grease (refer to			GREASE
				POINT LOCATIONS on page 23 for locations)
Idler arms		50 Hours		Two strokes (minimum) of lubricator using 251 H EP grease or
				equivalent No. 2 multi-purpose lithium grease (refer to			GREASE
				POINT LOCATIONS on page 23 for locations)
Mower Deck, Spindles, Wheels		50 Hours		Two strokes (minimum) of lubricator using 251 H EP grease or
				equivalent No. 2 multi-purpose lithium grease (refer to			GREASE
				POINT LOCATIONS on page 23 for locations)

22